Contact
Feedback

Incremental encoders
DBS60 Core

Rugged, versatile incremental encoder for industrial applications

Your Benefits

  • Diverse installation options thanks to different flange and shaft versions as well as flange and stator couplings with different assembly hole patterns
  • Hollow shaft clamp on the rear housing facilitates mounting
  • Various connection types enable flexible cabling
  • Compact housing dimensions save valuable space
  • The encoder is protected from high shaft temperatures and currents due to the insulated hollow shaft
  • Rugged design with large bearing distance allows high shaft loads and a longer service life
  • Only a few product variants due to electrical interfaces with a large voltage range, which reduces storage costs

Overview

Rugged, versatile incremental encoder for industrial applications

The DBS60 Core is a rugged incremental encoder with a diameter of 58 mm and a compact mounting depth. The portfolio includes solid shaft models with face mount flange and servo flange as well as hollow shaft designs (blind/through hollow shaft) for shafts up to a size of 5/8 inches (15.875 mm). The hollow shafts are available with shaft insulation and with a clamp on the rear housing on request. In addition to the standard interfaces for TTL and HTL, the DBS60 Core also offers two universal interfaces with a large voltage range which unites the 5 V TTL and 24 V HTL as well as 5 V TTL and 24 V TTL in one version. Due to its high enclosure rating, rugged design and a resolution of up to 10,000 pulses, the DBS60 Core is the ideal product for standard use in various industries.

At a glance
  • Face mount and servo flange with various hole patterns
  • Hollow shafts up to 5/8 inches in diameter, optionally insulated, front and rear clamping
  • Housing diameter 58 mm, compact installation depth
  • Number of lines up to 10,000 pulses
  • Cable connection, M12 and M23 male connector, radial
  • TTL/HTL and TTL interfaces with voltage range 4.5 V DC ... 30 V DC

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Mechanical design

    Solid shaft Servo flange

    Solid shaft face mount flange

    Blind hollow shaft

    Through hollow shaft rear clamping

    Through hollow shaft

    Solid shaft face mount flange with M3 & M4 (details in dimensional drawing)

    Electrical interface

    TTL/RS422

    HTL/Push pull

    TTL/HTL universal

    Permissible shaft loading (solid shaft)

    100 N radial 1)

    50 N axial 1)

    100 N radial 2)

    50 N axial 2)

    Enclosure Rating up toIP67 / IP65 / IP65 / IP65
    Programmable
    Maximum output frequency≤ 300 kHz
    Ambient temperature

    –20 °C +85 °C 3)

    –30 °C +100 °C 3)

    –30 °C +85 °C 3)

    • 1) Higher values are possible using limited bearing life.
    • 2) Higher values on request.
    • 3) These values relate to all mechanical versions including recommended accessories unless otherwise noted.
All technical data can be found accompanying the individual product

Downloads

TOP