Gateway systems
Telematic Data Collector

Intelligent networking – harness your data and be proactive

Your Benefits

  • Simple, fast, cost effective and beneficial utilization of data
  • Maximum availability of sensors and machines through real-time monitoring with user-defined alarms
  • Broad range of applications thanks to the many connection and communication options available
  • Future-proofed thanks to the use of open standards

Overview

Intelligent networking – harness your data and be proactive

The Telematic Data Collector (TDC) networks sensors, machines, systems and vehicles using IIoT platforms. The data are transmitted wirelessly via mobile, radio communication or fixed-line connections. They can also be analyzed and evaluated locally (edge computing). It is also possible to set up user-defined real-time alarms (e.g., SMS notifications) via a variety of interfaces based on relevant data. The TDC brings together all the information along the value adding chain, thereby providing the ideal basis for wide-ranging analysis of that information and for deriving useful measures to increase productivity and efficiency.

At a glance
  • Support for standardized interfaces and protocols for data communication
  • Tailored configuration via a web-based user interface
  • Integrated wireless technology and GPS module for precise position determination
  • Open end-to-end IIoT architecture

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Tasks

    Connection to digital services

    Condition monitoring

    Stock monitoring

    Outdoor location finding

    User-defined real-time alarms

    Sensors

    Acceleration sensor

    Magnetometer

    Thermometers

    GPS
    Modem
    Ethernet✔ (2)
    WLAN
    WPAN
    Serial
    CAN bus✔ (2) / ✔
    USB
    UART
    Internal computer1GB, DD3, dual-core Cortex-A7 with Cortex-M4 co-processor / 180 MHz ARM Cortex-M4
    Internal memory16 GB / 32 MB, 256 kB SRAM
    Operating systemLinux4Microservices, based on Linux Yocto Project 3.1.4 (Dunfell) / FreeRTOS
    ConnectivityMobile communication (4G) / WLAN / WPAN / LAN / Mobile communication (2G)
    Alarm outputPush message
    FixingIn vehicle or control cabinet / In vehicle or control cabinet (DIN rail 35 mm x 7.5 mm according to EN 60715)
    Weight

    230 g

    185 g

    180 g

    Ambient temperature, operation–20 °C ... +70 °C
    Ambient temperature, storage–40 °C ... +85 °C
    Supply voltage24 V DC12 V DC (8 V DC ... 36 V DC)
    Housing dimensions (W x D x H)

    162 mm x 32 mm x 101 mm

    145 mm x 67 mm x 37 mm

    118 mm x 23 mm x 115 mm

    Enclosure ratingIP20 (according to DIN EN 60529)
    User interfaceTDC-E Device Manager, User Manager, Interface Manager
    Data protocol

    MQTT

    REST API

    OPC UA

    WebSocket

    Network coverage

    North America

    Latin American

    Europe

    Middle East

    Africa

    APAC without Japan

    Worldwide

    Inputs/outputs

    I/O: 6 analog inputs (configurable, current and voltage), 6 digital inputs/outputs (configurable), 2 additional digital inputs, 2 additional digital outputs 1)

    I/O: 2 analog inputs (voltage), 4 digital outputs

    I/O: 8 analog inputs (configurable, current and voltage), 12 digital outputs

    I/O: 6 analog inputs (configurable, current and voltage), 6 digital outputs (configurable)

    Configuration interfaceWeb-Interface / REST API / RS-232 (DIAG)
    • 1) Analog measurement of voltage (0 – 36 V) with accuracy of ± (0.2%+30 mV), current (0 – 32 mA), with accuracy of ± (1%+0.1 mA), input resistance 27.5 kΩ typical for voltage mode, 100 Ω typical for current mode.
All technical data can be found accompanying the individual product

Downloads