Verification and Optimization
- Maximum accuracy of the measurement result
- Safety for your company and customers
- Measuring device and calibration from a single source
- Continually reliable process control
- Calibration under fixed laboratory conditions
- Written proof of compliance with promised device properties
SICK is a reliable manufacturer of process and analysis technology with many years of experience in this product segment. In addition, SICK sets high standards with the durability, accuracy, and long-term stability of its products. Calibration plays a key part when it comes to ensuring accuracy. The devices are tested against a reference and aligned with it if technically possible. Regular calibration ensures that device properties stipulated in the product specification are maintained in the long term and that processes remain stable for our customers. This saves time and resources.
- Functional check by trained personal
- Performance of calibration
- Evaluation of measured value deviation
- Verification under laboratory conditions
- Documentation based on calibration log
Phone-in Technical Support and Customer Care
8 a.m. – 5 p.m. Central Time, call 1-800-325-7425 and follow the prompts.
For emergency and critical care calls outside of normal business hours (5 p.m. – 8 a.m. Central Time), call 1-800-325-7425 and follow the prompts. You will be connected to a call center where your information will be forwarded to the appropriate department for follow up on a next available basis.
- Technical data overview
Technical data overview
High and low pressure calibration for gas flow meters
High and low pressure calibration for gas flow meters (2)
Recalibration for FLOWSIC600
Device is in an operational status
Declaration of no objection completed
Completed technical questionnaire (TQ recalibration)
8" low pressure flow calibration with air at ambient pressure: (with manufacturer's certificate)
12" low pressure flow calibration with air at ambient pressure: (with manufacturer's certificate)
1680293: FL600 4P, 3"-18"
1680294: FL600 4P, ≥ 20"
1680295: FL600 5C, 3"-18"
1680296: FL600 5C, ≥ 20"
1680297: FL600 4R, 3"-18"
1680298: FL600 4R, ≥ 20"
1680299: FL600 2P, 3"-18"
1680300: FL600 2P, ≥ 20"
1680301: FL600 4P, 3"-18"
1680302: FL600 4P, ≥ 20"
1680303: FL600 5C, 3"-18"
1680304: FL600 5C, ≥ 20"
1680305: FL600 4R, 3"-18"
1680306: FL600 4R, ≥ 20"
1680307: FL600 2P, 3"-18"
1680308: FL600 2P, ≥ 20”
Creation of a calibration log
Creation of a recalibration log
Creation of a test record
Duration Around 4 weeks (without shipping and depending on the range of services)