1) Limit values, reverse-polarity protected, operation in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) Signal transit time with resistive load.
5) With light/dark ratio 1:1.
6) Max. tightening torque: 0.6 Nm.
7) A = VS connections reverse-polarity protected.
8) B = inputs and output reverse-polarity protected.
9) C = interference suppression.
10) At UV ≤ 24 V and IA < 30 mA.
Safety-related parameters
MTTFD
1,222 years
DCavg
0 %
Communication interface
Communication interface
IO-Link V1.1
Communication Interface detail
COM2 (38,4 kBaud)
Cycle time
2.3 ms
Process data length
16 Bit
Process data structure
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 ... 15 = empty
VendorID
26
DeviceID HEX
0x8001CE
DeviceID DEC
8389070
Smart Task
Smart Task name
Base logics
Logic function
Direct
AND
OR
WINDOW
Hysteresis
Timer function
Deactivated
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter
Yes
Switching frequency
SIO Direct: 1000 Hz
SIO Logic: 1000 Hz
IOL: 900 Hz
Response time
SIO Direct: 300 µs ... 450 µs 1)
SIO Logic: 500 µs ... 600 µs 2)
IOL: 500 µs ... 900 µs 3)
Repeatability
SIO Direct: 150 µs 1)
SIO Logic: 150 µs 2)
IOL: 400 µs 3)
Switching signal
Switching signal QL1
Switching output
Switching signal QL2
Switching output
1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deactivated").
2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
