Safety light curtains
deTec / deTec4 / Pair

Illustration may differ

Receiver:Details

Type:C4P-EA09031D00

Part no.: 1220154

Usual availability:

Sender:Details

Type:C4P-SA09031A00

Part no.: 1220127

Usual availability:

Please note: Scope of delivery of sender and receiver without system plug. The system plugs must be ordered separately. For details, see “Accessories”.

Copy shortlink

Technical details
Downloads
Accessories
Videos
Service and Support

Show all

Hide all

Features

Application	Normal industrial environment
System part	Pair
Resolution	30 mm
Scanning range	30 m
Protective field height	900 mm
Response time	11 ms (Uncoded) 17 ms (code 1 or code 2)
No blind zones	Yes
Synchronization	Optical synchronisation
Integrated laser alignment aid	✔
End cap with integrated LED	✔
Items supplied	Sender Receiver Test rod with diameter corresponding to the resolution of the safety light curtain Safety instruction Mounting instructions Operating instructions for download

Safety-related parameters

Type

Type 4 (IEC 61496-1)

Safety integrity level

SIL3 (IEC 61508)

SILCL3 (IEC 62061)

Category

Category 4 (ISO 13849-1)

Performance level

PL e (ISO 13849-1)

PFH_D (mean probability of a dangerous failure per hour)
Single device	15.3 x 10^-9
Cascade with one guest	30.5 x 10^-9
Cascade with two guest devices	45.6 x 10^-9

T_M (mission time)

20 years (ISO 13849-1)

Safe state in the event of a fault

At least one OSSD is in the OFF state.

Functions

Protective operation	✔
Automatic calibration of the protective field width	✔
Beam coding	✔
Restart interlock	✔
External device monitoring (EDM)	✔
Cascading	✔
Smart presence detection	✔
Reduced resolution	✔
Dynamic protective field width during operation	✔
Differentiation between man and material (muting)	✔

Interfaces

System connection

Depending on system plug (M12 male connector, 5-pin or 8-pin)

Extension connection

Depending on system plug (without extension connection or with M12 female connector, 5-pin)

Configuration method

DIP switch on system plug

Display elements

LEDs

Display of the synchronization status of the upper and lower beams

✔

LEDs

✔

Application diagnostic output (ADO)

✔

IO-Link

✔

Near Field Communication (NFC)

✔

Fieldbus, industrial network
Integration via Flexi Soft safety controller	CANopen ¹⁾
	DeviceNet™
	EtherCAT®
	EtherNet/IP™
	Modbus TCP
	PROFIBUS DP
	PROFINET

¹⁾ For additional information on Flexi Soft -> www.sick.com/Flexi_Soft.

Electrical data

Protection class

III (IEC 61140)

Supply voltage V_S

24 V DC (19.2 V ... 28.8 V)

Ripple

≤ 10 %

Power consumption typical

3.5 W (DC) / 1.53 W (DC)

Output signal switching devices (OSSDs)
Type of output	2 PNP semiconductors, short-circuit protected, cross-circuit monitored ¹⁾
ON state, switching voltage HIGH	24 V DC (V_S – 2.25 V DC ... V_S)
OFF state, switching voltage LOW	≤ 2 V DC
Current-carrying capacity per OSSD	≤ 500 mA

Application diagnostic output (ADO)
Type of output	PNP semiconductor, short-circuit protected ¹⁾
Output voltage HIGH (active)	≥ V_s – 3 V
Output voltage LOW (deactivated)	High resistance
Output current HIGH (active)	≤ 100 mA

¹⁾ Applies to the voltage range between –30 V and +30 V.

Mechanical data
Dimensions See dimensional drawing
Housing material Aluminum extruded profile

Ambient data

Enclosure rating	IP65 (IEC 60529) IP67 (IEC 60529)
Ambient operating temperature	–30 °C ... +55 °C
Storage temperature	–30 °C ... +70 °C
Air humidity	15 % ... 95 %, Non-condensing
Vibration resistance	5 g, 10 Hz ... 55 Hz (IEC 60068-2-6)
Shock resistance	10 g, 16 ms (IEC 60068-2-27)

Other information
Wave length 850 nm
Type of light Near-infrared (NIR), invisible
Integrated laser alignment aid ✔
Laser class 1
Wave length 650 nm
Type of light Visible red light

Classifications

ECl@ss 5.0	27272704
ECl@ss 5.1.4	27272704
ECl@ss 6.0	27272704
ECl@ss 6.2	27272704
ECl@ss 7.0	27272704
ECl@ss 8.0	27272704
ECl@ss 8.1	27272704
ECl@ss 9.0	27272704
ECl@ss 10.0	27272704
ECl@ss 11.0	27272704
ETIM 5.0	EC002549
ETIM 6.0	EC002549
ETIM 7.0	EC002549
UNSPSC 16.0901	46171620