Contact
Feedback

Monitoring of dust emissions in ammunition disposal

Dust can be measured extractively in the case of moist exhaust gases, or continuously in-situ under dry stack conditions. For the standard application with dry flue gas (above the acid dew point), a DUSTHUNTER S (scattered light measurement principle) is best suited. In the case of wet flue gas (under the acid dew point), the FWE200DH is used. Here, the gas to be measured is removed from the stack in the bypass, heated to above the acid dew point, and continuously measured.

  • Following product families can be used
    Product family FWE200
    Extractive dust measuring system for wet gases
    • For very low to medium dust concentrations
    • Gas sampling and return combined in one probe
    • Contamination check
    • Automatic check of zero and reference point
    Product family DUSTHUNTER SP100
    Probe design with forward scattered light measurement
    • One-side installation
    • For very low to medium dust concentrations
    • Automatic check of zero and reference point
    • Contamination check
    • Hastelloy probe available for corrosive gas environments
    • For small to medium duct diameters
    • Device type for hazardous area Zone 2
    Product family FWE200DH
    Reliable dust measurement in wet gases
    • For very low to medium dust concentrations
    • Gas sampling and return combined in one probe
    • Contamination check
    • Automatic monitoring of zero and reference point
    • Easy parameterization and convenient operation – optionally via supplemental remote unit
    • Integrated system diagnostics for early detection of maintenance requirements
    Product family DUSTHUNTER SB100
    The type-approved dust measuring device with reverse scattered light measurement
    • For very low to medium dust concentrations
    • One-sided installation
    • Contamination check
    • Automated thorough check of zero and reference point
    • Automated compensation of background radiation, therefore no light absorber required
    • For medium to large duct diameters
TOP