Dynamic volume measurement of objects

Recording basic data correctly and efficiently is of fundamental importance for logistics processes. The ability to determine the weight and dimensions of cube-shaped and irregular objects with transparent, film-wrapped or very dark surfaces is the minimum requirement for this application. Objects with bar codes, matrix codes or RFID tags must also be able to be identified at conveying speeds of up to 4 m/s on flat, tray, and cross-belt conveyor belts. This data enables downstream processes to be carried out reliably, storage space to be optimized, and transport processes to be performed efficiently. Depending on the application, it may be necessary to meet these requirements at ambient temperatures down to −30 °C.

  • Following product families can be used
    Dimensioning and position determination of large or challenging objects
    • Measurement accuracy: Up to 20 mm x 20 mm x 20 mm
    • Object sizes: Up to 2,600 mm x 2,000 mm x 3,000 mm
    • Conveying speeds: Up to 3.0 m/s
    • Redundant system setup (optional)
    • MTTR: Less than 10 min. thanks to hardware-based parameter cloning
    • Central control unit enables easy system expansion
    Dimensioning with perspective
    • Certified measurement accuracy of up to 5 mm x 5 mm x 2 mm (L x W x H)
    • Detects object sizes up to 2,600 mm x 1,000 mm x 1,000 mm (L x W x H) depending on system variant
    • Conveyor speed of more than 2 m/s possible
    • Easy to integrate thanks to MSC800 controller
    The flexible and efficient detection system in one chain
    • Ultra-simple wiring for up to 60 sensors
    • Sequential cycling prevents mutual interference
    • Free arrangement of various sensor technologies
    • Sensors available in different lengths of cable
    • Sensor data evaluation in the system or direct transmission of raw data
    • Process stability thanks to diagnostic function
    Laser measurement without compromise - precise, fast and reliable
    • Precise measurement, even with very dark or glossy objects
    • Fine angular resolution for high measurement point density
    • High speed measurement with 600 Hz and fast data transmission with Gigabit Ethernet
    • Synchronization of devices without mutual interference
    • Industry-grade M12 connections

    Precise object measurement at very high speeds
    • Measurement accuracy up to 5 mm x 5 mm x 2 mm
    • Object sizes up to 5,500 mm x 1,600 mm x 1,250 mm
    • Conveying speeds up to 4.0 m/s
    • Certified according to MID, NTEP (OIML), MC and NMI
    • Option of output as point cloud
    • Dynamic scale value switchover
    • Detection of 10 mm or larger deformations on all six sides
    Flexible in use for length, width and height measurements
    • Beam separation: 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, 50 mm
    • Maximum range: 12 m
    • Functions: Cross beam measurement, 4 x zone measurement, high-speed scan, transparent mode
    • Interfaces: PNP, analog, RS485, IO-Link, PROFINET, PROFIBUS, EtherCAT®, EtherNet/IPTM, CANopen
    • Sun resistance mode with reliable switching threshold

Production logistics get smart

Closing the circle - Sensor solutions in production logistics - even for the smallest spaces in production

Learn more