1) With RFID ISO card transponder in plane parallel alignment to read/write device antenna; depending on dimensions and quality of transponder.
Mechanics/electronics
Connection type
1 x M12, 17-pin male connector, A-coded
1 x M12, 4-pin female connector, D-coded
Supply voltage
10 V DC ... 30 V DC
Power consumption
Typ. 8 W
Housing
Aluminum die cast
Plastic (PPS)
Housing color
Blue, black
Enclosure rating
IP67
Protection class
III
Weight
710 g
Dimensions (L x W x H)
147 mm x 88 mm x 39 mm 1)
MTBF
> 100 years
1) Swivel connector is 15 mm longer.
Interfaces
Ethernet
✔ , TCP/IP
Function
Host, AUX
Data transmission rate
10/100 MBit/s
PROFINET
✔
Function
PROFINET Single Port, PROFINET Dual Port (optional via external connection module CDF600-2), Host
Data transmission rate
10/100 MBit/s
EtherNet/IP™
✔
Function
Host
Data transmission rate
10/100 MBit/s
EtherCAT®
✔
Type of fieldbus integration
Optional over external fieldbus module CDF600
Function
Host
Serial
✔ , RS-232, RS-422, RS-485
Remark
RS-422/RS-485 only via 4-wire
Function
Host, AUX
Data transmission rate
0.3 kBaud ... 115.2 kBaud, AUX: 57.6 kBaud
CAN
✔
Remark
CSN (SICK CAN Sensor Network)
Function
Host
Data transmission rate
20 kbit/s ... 1,000 kbit/s
CANopen
✔
Function
Host
Data transmission rate
20 kbit/s ... 1,000 kbit/s
PROFIBUS DP
✔
Type of fieldbus integration
Optional over external fieldbus module CDF600-2
Function
Host
Digital inputs
2 (physical, 2 additional logical inputs via optional CMC600 parameter memory in CDB620 / CDM420)
Digital outputs
2 (physical, 2 additional logical outputs via optional CMC600 parameter memory in CDB620 / CDM420)
Optical indicators
6 LEDs, multi-color (device status)
1 RGB LED (Process feedback)
Acoustic indicators
1 beeper (Feedback)
Configuration software
SOPAS ET 1)
Memory card
microSD memory card (parameter cloning)
1) Another alternative is to generate your own configuration tools based on the SICK command language CoLa (e.g. in your own software or on PLC function blocks).
