Extractive gas analyzers
GMS800 FIDOR

Solution for continuous hydrocarbon measurements

Your Benefits

High availability of 99.5 %
Convenient remote diagnosis and operation via Ethernet using SOPAS-ET software
Minimum maintenance costs due to the absence of moving parts
Replacement of complete assemblies and modules makes repairs easy
Compatible with predecessor systems
Hydrogen as fuel gas, expensive helium is not required
Low operating costs, e.g., due to low hydrogen consumption (typical 30 ml/min)
The GMS811 FIDOR, on which the control unit (BCU) can be separated from the analyzer unit, supports convenient control and monitoring from a central control room.

Overview

Solution for continuous hydrocarbon measurements

A member of the GMS800 analyzer family, the GMS800 FIDOR extractive gas analyzer is ideally suited for emission monitoring according to regulatory requirements (in waste incinerators, cement and/or power plants, for example). Based on the proven flame ionization detection principle, the GMS800 FIDOR measures total hydrocarbon concentrations in gases at both trace levels and high concentration levels. The GMS800 FIDOR is available in three versions: the GMS810 FIDOR with integrated control unit (BCU), the GMS811 FIDOR with separate control unit (BCU) and the GMS840 FIDOR with a space-saving wall housing. The housing makes integration into existing systems such as SICK's MCS100 E HW multi-component analyzer very easy.

At a glance

Standard 19” enclosure for easy integration into all industry-typical systems
Space-saving wall housing (stand-alone)
Nearly maintenance free ejector pump delivers sample gas to the analyzer
Integrated catalytic converter (option) provides very clean zero gas
Automatic regulation and compensation of process pressure fluctuations
Protective filter at sample gas inlet
High degree of linearity (≤ 2 %) for very low and high measuring ranges

Distributor Finder

Distributor Finder

Find an Authorized SICK Distributor or Sales Rep

spareparts

Applications

Service & Support

Technical overview

Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

GMS800 FIDOR system

GMS800 FIDOR system

Measured values

C_org

Performance-tested measurands

C_org

Gas flow rate
	≤ 120 l/h

Process temperature
	≤ +230 °C

Process pressure
	–120 hPa ... 120 hPa Relative

Process gas humidity
	Non-condensing

Ambient temperature
	+5 °C ... +40 °C

Storage temperature
	–20 °C ... +70 °C

Ambient pressure
	900 hPa ... 1,100 hPa

Ambient humidity
	≤ 95 % Non-condensing

Conformities

Approved for plants requiring approval

2001/80/EC (13. BImSchV)

2000/76/EC (17. BImSchV)

27. BImSchV

TA-Luft (Prevention of Air Pollution)

EN 15267

EN 14181

MCERTS

Electrical safety

CE

Power supply
Power consumption	Without external heating

Auxiliaries
Instrument air	≤ 1,000 l/h Instrument air: 4.5 ±0.5 bar
Fuel gas	Typ. 30 ml/min Hydrogen: 5.0 or higher; 3 ±0.2 bar
Combustion air	Typ. 250 ml/min Instrument air: 3 ±0.2 bar; measuring ranges below 300 ppm (500 mg/m³) require an internal Or external catalytic converter
Zero gas	≤ 500 l/h Instrument air: 3 ±0.2 bar; measuring ranges below 300 ppm (500 mg/m³) require an internal Or external catalytic converter
Reference gas	≤ 500 l/h Propane in synthetic air: 75% of measuring range full scale value
Purge gas	> 1,200 l/h Air for case flushing, inlet

Corrective functions

Adjustment with test gases

Test functions

Extended device diagnosis via SOPAS ET software

GMS810 design

GMS810 design

Description

19″ rack enclosure with 4 rack units, for integration in cabinets

Electrical safety

CE

Enclosure rating
	IP40

Dimensions (W x H x D)
	483 mm x 177 mm x 485 mm (for details see dimensional drawings)

Weight
	≤ 17 kg

Power supply
Voltage	90 ... 240 V
Frequency	47 ... 63 Hz
Power consumption	≤ 450 W

Sample gas connections
Sample gas inlet	G 1/4″; G 1/8″ double, without antikink; G 1/8″ without antikink
Exhaust gas outlet	12 mm straight; 1/2″ straight; 10 mm 90° bent

Auxiliary gas connections
Auxilary gas inlet	Varies depending on type

GMS811 design

GMS811 design

Description

19″ rack enclosure with 4 rack units, for usage with separate control unit (BCU), for integration in cabinets

Electrical safety

CE

Enclosure rating
	IP40

Dimensions (W x H x D)
	483 mm x 177 mm x 352 mm (for details see dimensional drawings)

Weight
	≤ 17 kg

Power supply
Voltage	90 ... 240 V
Frequency	47 ... 63 Hz
Power consumption	≤ 450 W

Sample gas connections
Sample gas inlet	G 1/4″; G 1/8″ double, without antikink; G 1/8″ without antikink
Exhaust gas outlet	G 1/4″; G 1/8″ double, without antikink; G 1/8″ without antikink

Auxiliary gas connections
Auxilary gas inlet	Varies depending on type

GMS840 design

GMS840 design

Description

Closed sheet steel housing for wall mounting for use indoors

Electrical safety

CE

Enclosure rating
	IP54

Dimensions (W x H x D)
	522 mm x 475 mm x 478 mm (for details see dimensional drawings)

Weight
	20 kg

Power supply
Voltage	100 ... 120 V / 220 ... 240 V
Frequency	50 ... 60 Hz
Power consumption	≤ 300 W

Sample gas connections
Sample gas inlet	Straight screw-in connection, 6 mm, G1/8", stainless steel
Exhaust gas outlet	G 1/4″

Auxiliary gas connections
	Depending on type

FIDOR analyzer module

FIDOR analyzer module

Description

Flame ionization detector for measuring volatile organic components (VOC)

Measured values

C_org

Performance-tested measurands

C_org

Measurement principles

Flame ionisation detection

Gas flow rate
	≤ 120 l/h

Measuring ranges
C_org	0 ... 15 mg/m³ / 0 ... 10,000 mg/m³
	A flame arrester must be provided by the customer when measuring gas concentrations above the lower explosion limit (LEL)

Certified measuring ranges
C_org	0 ... 15 mg/m³ / 0 ... 50 mg/m³ / 0 ... 150 mg/m³ / 0 ... 500 mg/m³

Response time (t₉₀)
	≤ 2.5 s Without sample gas line

Sensitivity drift
	< 3 %: within the maintenance interval, relative to measuring range full scale

Zero point drift
	< 3 %: within the maintenance interval, relative to measuring range full scale

Detection limit
C_org	0.05 mg/m³

Electrical safety

CE

BCU control unit

BCU control unit

Description

The control unit serves as the human machine interface and is responsible for data processing and output as well as control and monitoring functions.

Indication
	Status LEDs: “Power,” “Failure,” and “Maintenance request”
	LC display

Operation

Via LC display and membrane keyboard

Dimensions (W x H x D)
For separat BCU control unit	375 mm x 275 mm x 66 mm (for details see dimensional drawings)

I/O module

I/O module

Description

Closed module with top-hat rail adapter or module for integration into enclosures

Analog outputs

4 outputs:
0/2/4 ... 20 mA, 500 Ω
Electrically isolated

Analog inputs

2 inputs:
0/2/4 ... 20 mA, 500 Ω
Not electrically isolated

Digital inputs

8 inputs:
+ 42 V
All inlets with common reference potential

Communication interface	Modbus Ethernet
Type of fieldbus integration	TCP
	RTU RS-485
Function	Connection to SOPAS ET software or OPC server

Number

1

All technical data can be found accompanying the individual product

Downloads