Incremental encoders
DBS60 Inox
Rugged incremental encoder made of stainless steel for challenging application conditions
Your Benefits
- High resistance to environmental influences due to stainless-steel housing
- IP67 enclosure rating and shaft sealing ring for optimum tightness
- Compact housing dimensions save valuable space and facilitate mounting
- Wide range of mechanical interfaces for an optimal match between the encoder and the specific application installation situation
- Flanges and stator couplings with different mounting holes allow diverse mounting options
- The TTL/HTL combination interface reduces product variance and thereby storage costs
Product selection
41 results:
- Mechanical design: Solid shaft, face mount flange
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 1,000
- Programmable/configurable: no
- Mechanical design: Solid shaft, Square flange
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 2,000
- Programmable/configurable: no
- Mechanical design: Solid shaft, Square flange
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 5,000
- Programmable/configurable: no
- Mechanical design: Solid shaft, Square flange
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 1,000
- Programmable/configurable: no
- Mechanical design: Solid shaft, face mount flange
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 5,000
- Programmable/configurable: no
- Mechanical design: Blind hollow shaft
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 2,048
- Programmable/configurable: no
- Mechanical design: Blind hollow shaft
- Shaft diameter: 12 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 1,024
- Programmable/configurable: no
- Mechanical design: Blind hollow shaft
- Shaft diameter: 10 mm
- Electrical interface: 4.5 V ... 30 V, TTL/HTL universal
- Connection type: Cable, 8-wire, radial, 5 m
- Pulses per revolution: 1,024
- Programmable/configurable: no
Overview
Rugged incremental encoder made of stainless steel for challenging application conditions
The stainless steel mechanical components as well as the high degree of tightness thanks to the shaft seal make the DBS60 Inox incremental encoder resistant to rough environmental influences. Its stainless-steel housing with IP67 enclosure rating has a diameter of 58 mm, thereby enabling use in challenging applications with limited installation space. The solid shaft models are available with face mount flange and square flange. The hollow shaft design provides optional shaft insulation against high operating temperatures and shaft flows. With various mechanical and electronic interfaces as well as a resolution of up to 5,000 pulses, the DBS60 Inox fulfills customer requirements from various fields of industry.
At a glance
- Housing, flange, and shaft made from stainless steel
- Enclosure rating IP67 thanks to shaft sealing ring
- Designs with blind hollow shaft as well as face mount or square flange with solid shaft
- Number of lines of up to 5,000 pulses
- Radial cable connection or M12 male connector
- TTL/RS-422 and HTL Push Pull, universal TTL/HTL interface with 4.5 - 30 VDC
