1 x “Ethernet” connection, 4-pin M12 female connector
1 x connection “Power”, 12-pin, M12 male connector
1 x Micro USB female connector, type B
Supply voltage
9 V DC ... 28 V DC
Power consumption
Typ. 4 W, 16 W with 4 max. loaded digital outputs
Housing color
Yellow
Enclosure rating
IP67, applies only when the plastic cover of the “Aux interface” is closed (IEC 60529:1989+AMD1:1999+AMD2:2013)
Protection class
III (IEC 61140:2016-1)
Weight
250 g, without connecting cables
Dimensions (L x W x H)
60 mm x 60 mm x 86 mm
Safety-related parameters
Category
B (EN ISO 13849-1:2015)
Performance level
PL b (EN ISO 13849-1:2015)
MTTFD (mean time to dangerous failure)
100 years, at 25 °C ambient temperature (EN ISO 13849-1:2015)
TM (mission time)
20 years (EN ISO 13849-1:2015)
Conformities
EN ISO 13849-1:2015, EN ISO 13842:2014, EN ISO 13855:2010
Performance
Response time
1 scan, typ. 67 ms
2 scans, ≤ 134 ms 1)
Detectable object shape
Almost any
Integrated application
Protective field evaluation with flexible fields
Protective field tolerance
100 mm, 0.66° (DIN CLC/TS 62046:2009, 5% remission)
Number of field sets
16 field triples (48 protective fields)
Simultaneous evaluation cases
3 simultaneous protective fields (per field set)
1) At +45° to +225° of the working range; max. 150 ms at –45° to +45° of the working range.
Interfaces
USB
✔
Remark
Micro USB
Function
AUX, parameterization
Digital inputs
4 (PNP, for field set switching)
Digital outputs
3 (PNP, to display a protective field violation, additional 1 x “Device Ready”)
Delay time
67 ms ... 30,000 ms (configurable)
Dwell time
67 ms ... 10,000 ms (configurable)
Optical indicators
2 LEDs (ON, switching status)
Ambient data
Object remission
≥ 5 % (reflectors) 1)
Electromagnetic compatibility (EMC)
Emitted radiation
Residential area (EN 61000-6-3:2007+AMD:A1:2011)
Electromagnetic immunity
Industrial environment (EN 61000-6-2:2005)
Vibration resistance
Sine resonance scan
10 Hz ... 1,000 Hz 2)
Sine test
10 Hz ... 500 Hz, 5 g, 10 frequency cycles 2)
Noise test
10 Hz ... 250 Hz, 4.24 g RMS, 5 h 3)
Shock resistance
50 g, 11 ms, ± 3 single shocks/axis 4)
25 g, 6 ms, ± 1,000 continuous shocks/axis 4)
50 g, 3 ms, ± 5,000 continuous shocks/axis 4)
Ambient operating temperature
–10 °C ... +50 °C 5)
Storage temperature
–40 °C ... +75 °C 5)
Switch-on temperature
–10 °C ... +50 °C
Temperature change
–25 °C ... +50 °C, 10 cycles 6)
Damp heat
+25 °C ... +55 °C, 95 % rF, 6 cycles 7)
Permissible relative humidity
Operation
< 80 %, Non-condensing (EN 60068-2-30:2005)
Storage
≤ 90 % rF, Non-condensing (EN 60068-2-30:2005)
Ambient light immunity
60,000 lx
3,000 lx, With direct light
1) Follow the notes in the operating instruction, when using reflectors.
2) IEC 60068-2-6:2007.
3) IEC 60068-2-64:2008.
4) IEC 60068-2-27:2008.
5) IEC 60068-2-14:2009.
6) EN 60068-2-14:2009.
7) EN 60068-2-30:2005.
General notes
Note on use
The TiM361S is a safety-related sensor that is suitable for use in the following applications: hazardous area, hazardous point, and access protection as well as mobile hazardous area protection (protection of automated guided vehicles and mobile platforms). The sensor must only ever be used within the limits of the prescribed and specified technical data and operating conditions.
By partnering with us, you can benefit from our expertise in the functional safety of productivity-increasing safety solutions. So that your processes run smoothly, man and machine work as a team, and we can jointly push the boundaries of what is achievable.