Measuring automation light grids
MLG-2

Your Benefits

High measurement accuracy for detecting even very small objects reliably
Transparent mode function for reliably detecting and measuring transparent objects
The high-speed scan offers short response times for safely detecting objects traveling at high speeds
The SOPAS ET configuration software with menu-driven wizard for quick configuration
Ambient light immunity enables greater reliability
Integrated interfaces and matching function blocks reduce the time and effort involved in the commissioning process
Simple maintenance without the need for specialist staff thanks to the cloning function with IO-Link

Product selection

MLG-2.ui.config.teaser.header.msg

Individual product configuration

MLG-2.ui.config.teaser.configuration.msg

Standard products

MLG-2.ui.config.teaser.productselection.msg

Show all Hide all

Filter by:

Device version

Operating range

Beam separation

Inputs/outputs

Detection height

Communication Interface detail

Software feature (default setting: see technical data/features)

Your desired configuration is being checked...

The configuration result cannot yet be generated. Please complete the missing inputs - the exclamations marks show the missing inputs, or you can contact us.

Overview

With the MLG-2 measuring automation light grid, SICK is offering the right solution for a wide range of applications in logistics and factory automation. The MLG-2 Prime, MLG-2 Pro and MLG-2 ProNet device variants are used in challenging applications with transparent objects and high object speeds, to name a couple of examples. With a resolution of up to 1.25 mm, the new “cross beam measurement” function and the “transparent” mode, the MLG-2 masters measuring task with high precision. The pre-installed solutions in the SOPAS ET configuration software allow even complex applications, such as object width measurement, to be parameterized with ease. The MLG-2 Pro and MLG-2 ProNet feature common industrial interfaces such as the RS845 or Ethernet interfaces.

At a glance

Beam separation: 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, 50 mm
Maximum range: 12 m
Functions: Cross beam measurement, 4 x zone measurement, high-speed scan, transparent mode
Interfaces: PNP, analog, RS485, IO-Link, PROFINET, PROFIBUS, EtherCAT®, EtherNet/IPTM, CANopen
Sun resistance mode with reliable switching threshold

MLG-2

Flexible in use for length, width and height measurements

MLG-2 measuring automation light grids from SICK offer the right solution for a wide variety of applications in logistics and factory automation. The MLG-2 units are used to monitor the material flow in conveyor belts, in automated storage and retrieval systems, in order processing and many other areas. For example, the light grid simultaneously determines the maximum height and overhang when measuring pallets. The sensors are modular and enable customers to select between different detection heights and beam separations. A clear display ensures easy configuration and diagnostics. Optical synchronization eliminates the need for wiring between the sender and receiver. SICK also offers a wide range of different types and interfaces.

The MLG-2 reliably determines the length, width and height of objects. A wide range of applications can be reliably solved thanks to the modular sensor design and the broad product portfolio.

MLG-2 Prime

MLG-2 Prime for standard applications

The MLG-2 Prime is suitable for all standard applications, including protrusion monitoring or object height and width measurement. Connection to the control is established via push-pull switching outputs or analog outputs. Data can be output directly via the IO-Link interface and the associated function blocks. The new "object re-detection" function saves time and resources. The MLG-2 Prime can be ordered in a pre-configured version.

Determining the position of the baggage cart in the robot cell

Switching from lengthwise to transverse transport

The MLG-2 Prime solves your standard applications with high measurement accuracy and is quick and easy to configure.

MLG-2 Pro

MLG-2 Pro for demanding applications

The light grids of the MLG-2 Pro variant are used in demanding applications to detect transparent objects and at high object speeds. With functions such as “Transparent mode,” “High-speed scan,” or “High measurement accuracy,” the MLG-2 Pro performs challenging measuring tasks with the utmost precision. The pre-installed solutions in the SOPAS configuration software allow even complex applications to be configured with ease. The MLG-2 Pro uses conventional industrial interfaces so that even individualized solutions can be programmed via the control.

“High-speed scan” function offers short response times for safe detection at high object speeds.

The “Sun and dust” mode allows the MLG-2 to operate trouble-free, even in harsh environments.

“Transparent mode” function for reliably detecting and measuring transparent materials.

The MLG-2 Pro masters even complex tasks in demanding environments. Resistant to ambient light as well as dust and thanks to various operating modes, the light grid is ideally equipped for your tasks.

MLG-2 ProNet

MLG-2 ProNet: Easy integration

As the degree of automation of a plant or machine grows, so too does the amount of cabling required – and therefore also the work involved in planning, installation, commissioning, and maintenance. But not with the MLG-2 ProNet from SICK. It offers all the advantages of a measuring automation light grid and now features integrated interfaces such as PROFINET, EtherCAT^®, EtherNet/IP^TM, CANopen and PROFIBUS. Thanks to corresponding function blocks, commissioning is quick and simple. Solutions are preinstalled in the SOPAS configuration software. This allows for even complex applications, such as object width measurement, to be configured with ease. It is also possible to change the format automatically via fieldbus.

PROFINET, EtherCAT^®, EtherNet/IP^TM, CANopen and PROFIBUS

The MLG-2 ProNet is optimally equipped for your interface: Matching function blocks reduce the time and effort involved in the commissioning process.

Applications

Technical overview

Show all

Hide all

Technical data overview

Communication interface	IO-Link (V1.1) Analog (current) Serial (RS-485) CANopen EtherCAT^® PROFIBUS DP (DPV1) PROFIBUS DP (DPV0) EtherNet/IP™ PROFINET
Switching output	Push-pull: PNP/NPN
Beam separation	2.5 mm ... 50 mm
Operating range	5 m 8.5 m 2 m 1.5 m 6.3 m 3.75 m
Detection height	140 mm ... 3,140 mm
Response time	3.5 ms ... 53.6 ms

Show all

Hide all

All technical data can be found accompanying the individual product

Measuring automation light grids
MLG-2

Your Benefits

MLG-2

Product selection

MLG-2.ui.config.teaser.header.msg

Individual product configuration

Standard products

Your configuration

Your desired configuration is being checked...

Overview

MLG-2

Flexible in use for length, width and height measurements

The MLG-2 reliably determines the length, width and height of objects. A wide range of applications can be reliably solved thanks to the modular sensor design and the broad product portfolio.

MLG-2 Prime

MLG-2 Prime for standard applications

The MLG-2 Prime solves your standard applications with high measurement accuracy and is quick and easy to configure.

MLG-2 Pro

MLG-2 Pro for demanding applications

The MLG-2 Pro masters even complex tasks in demanding environments. Resistant to ambient light as well as dust and thanks to various operating modes, the light grid is ideally equipped for your tasks.

MLG-2 ProNet

MLG-2 ProNet: Easy integration

The MLG-2 ProNet is optimally equipped for your interface: Matching function blocks reduce the time and effort involved in the commissioning process.

Applications

Technical overview

Technical data overview

Downloads

Measuring automation light grids MLG-2

Your Benefits

MLG-2

Product selection

MLG-2.ui.config.teaser.header.msg

Individual product configuration

Standard products

Overview

MLG-2

Flexible in use for length, width and height measurements

The MLG-2 reliably determines the length, width and height of objects. A wide range of applications can be reliably solved thanks to the modular sensor design and the broad product portfolio.

MLG-2 Prime

MLG-2 Prime for standard applications

The MLG-2 Prime solves your standard applications with high measurement accuracy and is quick and easy to configure.

MLG-2 Pro

MLG-2 Pro for demanding applications

The MLG-2 Pro masters even complex tasks in demanding environments. Resistant to ambient light as well as dust and thanks to various operating modes, the light grid is ideally equipped for your tasks.

MLG-2 ProNet

MLG-2 ProNet: Easy integration

The MLG-2 ProNet is optimally equipped for your interface: Matching function blocks reduce the time and effort involved in the commissioning process.

Applications

Technical overview

Technical data overview

Downloads

Measuring automation light grids
MLG-2