Contact
Feedback

Non-contact safety switches

Safety solutions – low-wear and low-maintenance

Non-contact safety switches are the optimal solution if precise guidance of protective doors is difficult. Whether magnetic, inductive or via transponders, they are low-wear and low-maintenance when it comes to safe monitoring of doors or safe position monitoring.

more

Inductive safety switches

Safe position monitoring up to PL e

The compact inductive safety switches from SICK play a key role in safe position monitoring, for example in AGV applications. The safety switches are not only small and versatile but also provide non-contact operation which keeps wear to a minimum.

product selection

Safe monitoring of doors and flaps

The right solutions for your application

The protection of machines can be varied: Doors and flaps are often indispensable for this and must be reliably monitored. Highly manipulation-proof magnetic safety switches or transponder safety switches with high tolerance to door offset are best at completing this task.

product selection

Safe series connection

Low wiring effort saves time and money

A safe series connection is used to connect protective devices on machines. It reduces the number of safety capable inputs on the control and the amount of effort needed for wiring. For compact machines and combinable machine modules, SICK offers solutions from simple to complex.

more
Non-contact safety switches
Inductive safety switches
Safe monitoring of doors and flaps
Safe series connection

Select your solution

You will find the right products or product families here

Filter by:

32 results:

Result 1 - 8 out of 32

Safe and easy position monitoring up to PL d
  • Rectangular type: 12 mm x 26 mm x 40 mm
  • Response range: 4 mm
  • Two OSSD safety outputs
  • Enclosure rating: IP67
  • Temperature range: –25 °C bis +70 °C
  • Rugged VISTAL® housing
  • Up to performance level PL d (EN ISO 13849)
  • Connection variants: M8 male connector, cable or cable with M12 male connector
Compare now
Select
Safe and easy position monitoring up to PL d
  • Types: M12 to M30
  • Increased response ranges: 4 mm to 15 mm
  • Two OSSD safety outputs
  • Enclosure rating: IP67
  • Temperature range: –25 °C to +70 °C
  • Nickel-plated brass housing, plastic sensing face
  • Up to performance level PL d (EN ISO 13849)
  • Connection variants: M12 male connector, cable or cable with M12 male connector
Compare now
Select
Mechanical bolt for rugged door safeguarding and high machine uptime
  • Rugged design
  • Variants with ANSI-compliant locking mechanism
  • Standardized frame plates suitable for many safety switches from SICK
  • Horizontal installation tolerance of 27 mm
  • Compensation of vertical door offset up to ± 7 mm
  • Variants with catch release button and emergency release
Compare now
Select
Safety switch with magnetic locking device for process protection
  • 500 N magnetic locking force, 25 N retaining force
  • PL e / Cat. 4 (EN ISO 13849), SIL3 (EN 61508) for door monitoring
  • Offset tolerance of ± 5 mm
  • Enclosure rating IP 67
  • Standard or integrated mounting
  • Variants with two M12 plug connectors for simple cascading
Compare now
Select
Simple and established non-contact door monitoring
  • Response range up to 7 mm
  • 2 or 3 contacts
  • Up to performance level PL e (EN ISO 13849)
  • Sensors with plug connector or connected cable
  • Flexi Loop-compatible M12 plug connector (depending on variant)
Compare now
Select
Simple and established non-contact door monitoring
  • Response range of up to 9 mm
  • 2 or 3 contacts
  • Up to performance level PL e / Cat. 4 (EN ISO 13849)
  • Sensors with plug connector or connected cable
  • LED status indicator (RE27)
  • Flexi Loop-compatible M12 plug connector (depending on variant)
Compare now
Select
Compact, safe, and flexible
  • Response range of up to 14 mm
  • Small housing with flexible mounting options
  • Sensor activation possible from three sides
  • Four different actuators available
  • Universally coded, uniquely coded, and permanently coded sensors
  • PL e (EN ISO 13849), SIL3 (IEC 61508)
  • Safe series connection of up to 30 sensors possible
Compare now
Select
Safety locking device with transponder monitoring
  • PL e for door and locking monitoring (EN ISO 13849)
  • Locking force: up to 3,900 N
  • Actuator with high coding level (EN ISO 14119)
  • Enclosure rating: IP67, IP69K
  • Power to lock or power to release variants
  • Three actuation directions
  • Optional emergency release
  • Variants with two illuminable pushbuttons
Compare now
Select

Result 1 - 8 out of 32

Advantages

Safety tasks that are solved by safety switches

Safety switches are indispensable in any application where safety is required for people and machinery. They are used for protecting movable physical guards, determining the position of dangerous movements, and the safe stop function. Different safety tasks require different safety switches: Electro-mechanical and non-contact safety switches, safety locking devices, and safety command devices.

Optimal protection against manipulation thanks to transponder technology

For the safety of persons, the EN ISO 14119 standard defines manipulation protection measures that depend on the type and coding of the locking device. Transponder technology is used to avoid critical situations that occur whenever an attempt is made to manipulate the protective devices installed in machines. This eliminates the need for costly design measures on machines.
Very high protection against manipulation

With the appropriate variant of the safety switch with transponder technology, different coding levels can be achieved. With universal coding, all actuators are accepted; with unique and permanent coding, only the previously taught-in actuator is accepted, thus achieving a higher coding level.

Product recommendation STR1

Product recommendation TR110 Lock

Product recommendation MLP1

Safety locking devices and non-contact safety switches with transponder technology

The high protection against manipulation is achieved by unique or permanent coding of the safety switch. Machine manufacturers can therefore do without additional assembly measures. The effort for mounting the safety switch in a concealed location, out of the scanning range of workers or with an additional locking device for a plausibility check is not necessary, saving you money.

Product recommendation STR1

Product recommendation TR110 Lock

Non-contact safety switches – intelligent solutions, low-wear and low-maintenance

Non-contact safety switches are well-suited if precise guidance of protective devices is difficult. They have very long service lives thanks to the low-wear and low-maintenance construction. They are also resistant to shock and vibrations and offer a high level of protection against manipulation. The portfolio is divided into three areas: Magnetic, transponder and inductive safety switches. Cuboid and cylindrical designs are available for each principle of operation.

Tasks of non-contact safety switches

Safe position monitoring

Inductive safety switches stand for simple and safe position and area monitoring. They monitor moving machine parts.

The safety switches are completely wear-free without a special actuator; the core of their principle of operation is that they only need to detect a metal object. This could, for example, be a metal part of a machine that the safety switch detects exactly when it is in a previously defined position. The variety of variants allows installation into all types of machines.

Product recommendation IME2S

Safe access protection

Machines and production lines have doors and flaps that need to be secured. Optimum access protection is provided by non-contact safety switches, which offer a high tolerance to door offset. Magnetic safety switches and transponder safety switches are low-wear and low-maintenance and offer high protection against manipulation.

Product recommendation STR1

Safety locking devices prevent uncontrolled intervention

Safety switches with locking devices lock protective devices securely and prevent access to areas which are protected by protective devices. Safety switches with locking function can be relied upon to prevent people from opening protective devices until dangerous states (machine overrun movements, for example) have passed or machine processes that cannot be interrupted have been completed.

Safety locking device variants

Electromechanical locking devices are the proven solution for applications that require a high and reliable locking force and do not place high demands on the performance level or protection against manipulation.

Product recommendation i10 Lock

A magnetic safety locking device is the efficient solution for applications that require process protection in addition to the safety function. The safety locking device provides very high reliability for door monitoring and uses a strong electromagnet to ensure that the protective door is closed and the production process runs smoothly.

Product recommendation MLP1

Locking devices with transponder monitoring combine a high and reliable locking force with the high reliability of the transponder technology – this means performance level e and maximum protection against manipulation.

Product recommendation TR110 Lock

Linking of protective devices via safe series connection

Different machine areas need different protective devices. They all have the same goal: To ensure that the machine stops safely in case of faults or danger. As complexity increases, so do the requirements for integrating safety sensors into the machine. The big challenge is safely connecting all safety sensors. The SICK solution: Safe series connection

Safe series connection variants

Hard wiring of sensors

If only a few sensors are in use and the requirements for these are low, such as in the event of infrequent actuation, sensors with volt-free contacts can be attached in a series connection via hard wiring – this is simply economical.

Product recommendation RE1

Safe series connection in the control cabinet

If you want to save on safety capable inputs on the safety controller with series connection but don’t want to do without diagnostics, series connection of safety switches in the control cabinet is a good solution. Application diagnostic outputs can be connected independently, semiconductor outputs can be evaluated together.

Product recommendation STR1

Simple series connection using T-connector

Series connection with T-connector is the solution for sensors with semiconductor outputs. This offers a very high level of safety and simple wiring via M12 plug connectors and T-connectors.

Product recommendation STR1

Flexible series connection with Flexi Loop

Flexi Loop is a flexible solution for safe series connection with up to 32 safety sensor thanks to individual monitoring up to performance level e. Detailed diagnostics enable fast troubleshooting. Wiring is simple via the M12 connectivity.

Product recommendation Flexi Loop

Downloads

TOP