Mounting systems

Show all Hide all
Filter by:

1,340 results:

Result 1 - 24 out of 1340

  • Description: FlexFix bracket for 2 devices (e.g. sender and receiver), can be aligned ± 15°, including M5 screw
  • Material: Plastic
  • Packing unit: 4 pieces
Details
Compare now
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 6.5 mm housing diameter without fixed stop
Details
Compare now
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 4 mm housing diameter without fixed stop
Details
Compare now
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 5 mm housing diameter without fixed stop
Details
Compare now
  • Material: Plastic
  • Items supplied: Without mounting hardware
  • Usable for: Round sensors with 3 mm housing diameter without fixed stop
Details
Compare now
  • Description: FlexFix bracket for 1 device (e.g. sender or receiver), can be aligned ± 15°, including M5 screw
  • Material: Plastic
  • Packing unit: 2 pieces
Details
Compare now
  • Description: Alignment bracket for scanGrid2, can be aligned ± 10°
  • Suitable for: scanGrid2
Details
Compare now
  • Description: Weather proof cover
  • Material: Aluminum
Details
Compare now
  • Description: Compact FlexFix bracket for 1 device (e.g. sender or receiver), can be aligned ± 15°, including M5 screw, for mounting with countersunk screws
  • Material: Plastic
  • Packing unit: 2 pieces
Details
Compare now
  • Description: Compact FlexFix bracket for 2 devices (e.g. sender and receiver), can be aligned ± 15°, including M5 screw, for mounting with countersunk screws
  • Material: Plastic
  • Packing unit: 4 pieces
Details
Compare now
  • Description: Adapter plate for easy mounting of the GLS1 with existing hole pattern
  • Items supplied: Adapter plate, screw set for adapter plate and GLS1
  • Suitable for: GLS1
Details
Compare now
  • Description: Bracket for mounting TRANSIC on the wall
Details
Compare now
  • Description: Mounting bracket for integrated profile cylinder/tie-rod cylinder
  • Material: Zinc diecast
  • Items supplied: Mounting hardware included
Details
Compare now
  • Description: Flange with tube for combined pT probe, with cover, seal, inner diameter 70 mm, nominal length 240 mm
  • Material: Structural steel 1.0037
Details
Compare now
  • Description: Weather proof cover for analyzer, does not cover purge air attachment
Details
Compare now
  • Description: Flange with tube, inner diameter 70,2 mm, nominal length 240 mm, material = 1.0037
  • Material: Structural steel 1.0037
Details
Compare now
  • Description: Protective housing for universal clamp
  • Material: Steel, zinc diecast
  • Items supplied: Universal clamp, mounting hardware
  • Suitable for: W16
Details
Compare now
  • Description: Mounting bracket for LMS5xx (for retrofitting, if 2018303 is already in use)
  • Material: Stainless steel V2A (1.4301)
Details
Compare now
  • Description: Aluminium measuring wheel with O-ring (NBR70) for 6 mm solid shaft, circumference 200 mm
Details
Compare now
  • Description: Aluminium measuring wheel with O-ring (NBR70) for 10 mm solid shaft, circumference 200 mm
Details
Compare now
  • Description: Housing end cap as mechanical protection for the backplane bus. Attach the housing end cap to the last module.
Details
Compare now
  • Description: Weather protection hood
Details
Compare now
  • Description: Collet for through hollow shaft, shaft diameter 12 mm, outer diameter 14 mm
Details
Compare now
  • Description: Collet for blind hollow shaft, shaft diameter 6 mm, outer diameter 15 mm
Details
Compare now

Result 1 - 24 out of 1340