Verification and Optimization

Safe and regularly inspected

System operators are responsible for conducting their operations safely and productively. Complying with legal requirements and ensuring the safety of people and the environment are essential. With Verification & Optimization from SICK LifeTime Services, SICK ensures that the safety and reliability of equipment is guaranteed. The experts at SICK set themselves apart with many years of experience and extensive knowledge. As a result, errors and downtime are significantly reduced to ensure operations run smoothly.

10 results:

Result 1 - 10 out of 10

View: View Gallery View List
Product family Performance check
Inspection of defined functions
  • Inspection of ambient conditions, damage, alignment and contamination of the SICK product
  • Inspection of performance
  • Function and communication test
Product family Maintenance
Inspection, maintenance and restoration of defined functions
  • Inspection of ambient conditions, damage, alignment and contamination of the SICK product
  • Restoration of defined functions
  • Inspection and adjustment of application-specific parameters
  • Archiving of parameters, acceptance test and handover to the employees
Product family Factory Acceptance Test
Certainty of the ordered product quality and functionality
  • Inspection of the ordered products for completeness, quality and function
  • Execution of tests at the respective SICK production site
  • Insight into the production of comparable products
  • Acceptance and test report
Product family Calibration
Maximum process reliability thanks to calibration
  • Functional check by trained personal
  • Performance of calibration
  • Evaluation of measured value deviation
  • Verification under laboratory conditions
  • Documentation based on calibration log
Thorough check of protection against electrical hazards
  • Determination of the correct function of the protective bonding circuit as per the requirements of IEC 60204-1
  • Determination of the contact resistances and leakage currents
  • Production of a test record, which also describes any defects
  • Production of an inspection report
Product family Inspection
Decades of experience protecting your employees
  • Evaluation of the optical protective devices to ensure they have been installed correctly and according to the specification
  • Inspection of whether the protective device is operating according to machine usage
  • Production of an inspection report and issuance of an inspection seal

Individual, comprehensive safety inspection
  • Inspection of the major mechanical hazards on a machine
  • Inspection of all technical protective devices for correct alignment, installation, and functionality
  • Inspection of the function and operation of electrical, pneumatic, and hydraulic safety-related control measures
  • Production of an inspection report

Product family Stop time measurement
Specification and verification of safety distance
  • Performance of stop time measurement
  • Calculation of the required safety distance between the hazardous point and the non-physical guard according to EN ISO 13855
  • Generation of a report with the measurement results
Product family Accident investigation
Root cause analysis of accidents and near-accidents
  • Investigation of the circumstances of the accident or incident
  • Identification of the cause of the accident
  • Recommendation of measures to prevent other incidents or accidents
Product family Repeatability test
Inspection of repeatability under laboratory conditions
  • Inspection of linearity and zero point drift under laboratory conditions
  • Customer-specific test gas concentrations and measuring ranges
  • Measurement period is up to 72 hours
  • Submission of a test report when the test is complete
  • Execution of the test at the respective SICK production site

Result 1 - 10 out of 10