1) Object with 6 ... 90 % remission (based on standard white to DIN 5033).
2) Equivalent to 1 σ.
3) Average service life: 50,000 h at TU = +25 °C.
4) Teach-Offset 15 mm.
Mechanics/electronics
Supply voltage
10 V DC ... 30 V DC 1)
Ripple
< 5 Vpp2)
Current consumption
20 mA 3)
Switching output
PNP
Switching mode
Light/dark switching
Output current Imax.
≤ 50 mA
Response time
Typ. 95 ms 4)
Switching frequency
5 Hz 5)
Analog output
-
Input
MFin = multifunctional input programmable
Connection type
Cable with M8 male connector, 4-pin, 200 mm 6)
Cable material
PVC
Cable diameter
Ø 3 mm
Circuit protection
A 7)
B 8)
D 9)
Protection class
III
Housing material
Plastic, MABS
ABS
Optics material
Plastic, PMMA
Enclosure rating
IP67
Ambient operating temperature
–25 °C ... +50 °C
Ambient temperature, storage
–40 °C ... +75 °C
UL File No.
E181493
1) Limit values. Operated in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) Jitter +- 20 ms.
5) With light/dark ratio 1:1.
6) Do not bend below 0 °C.
7) A = VS connections reverse-polarity protected.
8) B = output reverse-polarity protected.
9) D = outputs overcurrent and short-circuit protected.
Safety-related parameters
MTTFD
925 years
DCavg
0 %
Communication interface
Communication interface
IO-Link V1.1
Communication Interface detail
COM2 (38,4 kBaud)
Cycle time
5 ms
Process data length
4 Byte
Process data structure
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 = detection signal Qint.1
Bit 3 = detection signal Qint.2
Bit 4 ... 15 = empty
Bit 16 ... 31 = distance value
VendorID
26
DeviceID HEX
0x8001B8
DeviceID DEC
8389048
Smart Task
Smart Task name
Base logics
Logic function
Direct
AND
OR
WINDOW
Hysteresis
Timer function
Deactivated
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter
Yes
Switching frequency
SIO Direct: 5 Hz 1)
SIO Logic: 5 Hz 2)
IOL: 5 Hz 3)
Response time
SIO Direct: typ. 90 ms 1)
SIO Logic: typ. 90 ms 2)
IOL: typ. 95 ms 3)
Repeatability
2)
3)
1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deactivated").
2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
