Contact
Feedback

Incremental encoders
DFS60

High-resolution, programmable encoder for sophisticated applications

Your Benefits

  • Reduced storage costs and downtime due to customer-specific programming
  • Variety of different mechanical and electrical interfaces enable the encoder to be optimally adjusted to fit the installation situation
  • Excellent concentricity even at high speeds
  • High resolution of up to 16 bits ensures precise measurements
  • Permanent and safe operation due to a high enclosure rating, temperature resistance and a long bearing lifetime
  • Programmability via the PGT-08 programming software and the PGT-10-Pro display programming tool allow the encoder to be adapted flexibly and quickly according to customer needs
  • Programmable zero pulse position simplifies installation

Product selection

DFS60.ui.config.teaser.header.msg

Individual product configuration

DFS60.ui.config.teaser.configuration.msg

Standard products

Select your desired product from our product range.

Show all Hide all

Your desired configuration is being checked...

The configuration result cannot yet be generated. Please complete the missing inputs - the exclamations marks show the missing inputs, or you can contact us.

    Overview

    High-resolution, programmable encoder for sophisticated applications

    The DFS60 is a high-resolution incremental encoder with a diameter of 60mm. It offers a wide variety of mechanical and electric interfaces and can also be programmed by the customer if required. Programming of the output signal and zero pulse is a unique feature for the market. The high enclosure rating, wide temperature range and large ball bearing distance ensure extreme robustness, making the DFS60 the ideal encoder for industrial applications in harsh environments

    At a glance
    • Compact installation depth
    • High resolution up to 16 bits
    • Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
    • Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial
    • Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull
    • Mechanical interfaces: face mount or servo flange, blind or through hollow shaft
    • Remote zero set possible

    Applications

    Technical overview

     
    • Technical data overview

      Technical data overview

      Mechanical design

      Blind hollow shaft

      Solid shaft Servo flange

      Solid shaft face mount flange

      Through hollow shaft

      Solid shaft face mount flange with M3 & M4 (details in dimensional drawing)

      Electrical interface

      TTL/RS422

      HTL/Push pull

      HTL/Push pull, 0-SET

      TTL/RS422, 0-SET

      TTL/HTL programmable

      Sin/Cos 1.0 VPP

      TTL/HTL programmable, 0-SET

      Sine 1.0 VSS

      Pre-programmed to TTL

      Sin/cos 1.0 VSS (differential)

      4,5 ... 32 V, TTL/HTL programmable, preset HTL

      Permissible shaft loading (solid shaft)

      80 N radial

      40 N axial

      Enclosure Rating up to

      IP67

      IP65

      Programmable– / ✔
      Maximum output frequency≤ 200 kHz ... ≤ 820 kHz
      Ambient temperature

      0 °C +85 °C

      –40 °C +100 °C 1)

      –30 °C +100 °C 2)

      • 1) Stationary position of the cable.
      • 2) Flexible position of the cable.
    All technical data can be found accompanying the individual product

    Downloads

TOP