| Measured values | Scattered light intensity, dust concentration (after gravimetric comparison measurement) |
| Performance-tested measurands | Dust concentration |
| Measurement principles | Scattered light forward |
| Spectral range | | | 640 nm ... 660 nm
Laser, protection class 2, power < 1 mW |
|
| Measuring ranges | | | Dust concentration | 0 ... 5 mg/m³ / 0 ... 500 mg/m³ | | Measuring ranges freely selectable | | Higher measuring ranges on request |
|
| Certified measuring ranges | | | Dust concentration | 0 ... 7.5 mg/m³ / 0 ... 10 mg/m³ / 0 ... 15 mg/m³ / 0 ... 50 mg/m³ / 0 ... 100 mg/m³ / 0 ... 500 mg/m³ |
|
| Response time (t90) | | | 0.1 s ... 600 s
Freely adjustable |
|
| Accuracy | | | ± 2 %
Of measuring range full scale |
|
| Process temperature | | | PVDF gas removal probe | ≤ +120 °C | | Hastelloy gas removal probe | ≤ +220 °C
Versions for higher temperatures on request |
|
| Process pressure | | | With SLV7 2BH1100 purge air unit | –20 hPa ... 20 hPa
Other pressure ranges on request |
|
| Process gas velocity | | | 5 m/s ... 30 m/s |
|
| Process gas humidity | | | Max. 40 g/m³ liquid water without water vapour |
|
| Ambient temperature | | | –20 °C ... +50 °C | | Intake temperatures for purge air | –20 °C ... +45 °C |
|
| Conformities | Approved for plants requiring approval 2001/80/EC (13. BImSchV) 2000/76/EC (17. BImSchV) 27. BImSchV TA-Luft (Prevention of Air Pollution) EN 15267 EN 14181 U.S. EPA PS-11 compliant When options are used, agreement with local authorities may be required |
| Electrical safety | CE |
| Enclosure rating | | | Measuring and control unit | IP54 | | Electronics enclosure | IP65 |
|
| Analog outputs | 3 outputs:
0/2/4 ... 20 mA, + 750 Ω
Electrically isolated |
| Analog inputs | 6 inputs:
0 ... 20 mA
Not electrically isolated |
| Digital outputs | 5 relay outputs (change-over contacts), potential-free:
48 V, 1 A |
| Digital inputs | 8 inputs |
| Modbus | ✔ , ✔ | | Type of fieldbus integration | TCP (via optional interface module, only one module possible per MCU) | | RTU RS-485 (via optional interface module, only one module possible per MCU) |
|
| PROFIBUS DP | ✔ | | Type of fieldbus integration | Via optional interface module (only one module possible per MCU) |
|
| Ethernet | ✔ | | Type of fieldbus integration | Via optional interface module (only one module possible per MCU) | | Function | Connection to SOPAS ET software or OPC server |
|
| Serial | ✔ | | Type of fieldbus integration | RS-232 | | Function | Proprietary service interface |
|
| Indication | | | LC display and status LEDs on control and remote unit |
|
| Input | Functional keys |
| Operation | Menu-driven operation via control unit or software SOPAS ET |
| Dimensions (W x H x D) | | | FWE200DH measuring and control unit | 813 mm x 722 mm x 286 mm (for details see dimensional drawings) |
|
| Weight | | | FWE200DH measuring and control unit | 65 kg | | Sampling probe | ≤ 15 kg |
|
| Material in contact with media | PVDF, Hastelloy |
| Power supply | | | Voltage | 115 V AC | | 230 V AC | | Frequency | 50 Hz / 60 Hz | | Power consumption | FWE200DH measuring and control unit: 800 VA ... 1,700 VA | | Air heater: ≤ 1,000 VA | | Sample gas line, heated: ≤ 300 VA |
|
| Test functions | Automated self-test (zero point, contamination, drift) Contamination limit values: Warning at 30%; fault at 40% Manual linearity test with reference filter |
| Options | FWE200DH mounting rack Air backwash Water backwash Sample gas line, heated Air heater |
