Absolute encoders
Absolute encoders generate information about position, angle, and rotation counts in type-specific angle steps. For this, a unique code pattern is assigned to each angle increment. The number of code patterns available per revolution determines the resolution. Each code pattern forms a unique reference, and is therefore an absolute position. There is therefore no need for a reference run after switching on. A singleturn encoder measures the absolute position within a revolution. A multiturn encoder not only provides the position within a revolution but also the number of revolutions.
Filter by:
12 results:
- 36 mm absolute encoder with max. 26 bits (singleturn: 14 bits, multiturn: 12 bits)
- Face mount/servo flange, blind hollow shaft
- Rotatable male connector or cable connection
- IO-Link, CANopen, SSI, SAE J1939 interface with programmable parameterization
- Diagnostic functions
- Stainless steel (Inox versions)
- Enclosure rating up to IP67 or IP69K
- High-resolution, 30-bit absolute encoder
- Integrated web server and FTP server
- DLR (Device Level Ring)
- Function module
- Comprehensive diagnostic functions
- IP addressing via software or hard-ware
- Round axis functionality (transmission calculation)
- High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
- Face mount flange, servo flange and blind hollow shaft
- Connection type: 3 x M12 axial male connector
- Data tranfer speed on the fly in the range of µs
- EtherCAT® interface CoE (CiA DS-301) Device profile (CiA DS-406)
- Round axis functionality
- Alarms, warnings and diagnostics functions for speed, position, temperature, operating time, etc.
- Status display via 5 LEDs
- High-resolution 30-bit absolute encoder (18-bit singleturn and 12-bit multiturn)
- Face mount flange, servo flange and blind hollow shaft
- Connection type: 3 x M12 axial male connector
- PROFINET-IO-RT interface
- Less than 5 ms data update time
- Round axis functionality
- Alarms, warnings and diagnostics functions for speed, position, temperature, operating time, etc.
- Status display via 5 LEDs
- Rugged absolute multiturn encoder with up to 31 bits (14-bit singleturn and 17-bit multiturn)
- Face mount flange, servo flange or blind hollow shaft
- Compact design (<70 mm)
- Integrated PROFIBUS interface with DP V0, V1, and V2 functionality (depending on type)
- Connectivity: 3 x M12 male connector
- Protection class up to IP67
- Operating temperature: –30 to +80 °C (depending on type)
- High-resolution absolute encoder with up to 30 bits (AFM60) or 18 bits (AFS60)
- Face mount flange, servo flange, blind hollow shaft or through hollow shaft
- SSI, SSI + incremental or SSI + sin/cos interface
- Resolution, offset, etc. can be programmed (depending on the type)
- Connection technology: M12, M23 male connector or cable connection
- Enclosure rating: IP67 (housing), IP65 (shaft)
- Operating temperature: –40 °C to +100 °C (depending on the type)
- Housing, flange, and shaft made from stainless steel
- Face mount, servo, or square flange with solid shaft and blind hollow shaft
- Enclosure rating: IP67
- Resolution: up to 262,144 steps per revolution and 4,096 revolutions
- Electrical interfaces: SSI, SSI + Incremental, SSI + Sin/Cos
- Can be optionally programmed with PGT-08-S and PGT-10-Pro
- Absolute singleturn encoder
- Resolution: up to 15 bits (32,768 increments)
- Electrical interface: SSI with gray code type or gray capped
- Electrical interface: Parallel with gray, gray capped, binary, BCD code type
- Zero-set function
- Mechanical interfaces: face mount flange, servo flange, blind and through hollow shaft
- Enclosure rating: Up to IP66
- Compact 36 mm absolute encoder with up to 3723 steps (for singleturn and multiturn)
- Servo flange
- Radial cable connection
- Analog interface 4 to 20 mA or 0 to 10 V
- Programming via keypad on the encoder
- IP65 protection class
- Operating temperature: –30 °C to +80 °C
- Compact 60 mm absolute encoder with up to 13107 steps
- Servo flange
- Radial connector connection
- Analog interface 4 to 20 mA or 0 to 10 V
- Programming via keypad on the encoder
- IP68 protection class
- Operating temperature: –30 °C to +80 °C
- Extremely rugged multiturn absolute encoder with up to 26 bits
- Through hollow shaft with thin installation depth
- Zero-set and preset functions via hardware/software
- Communication interface: SSI, PROFIBUS DP
- Electronically adjustable, configurable resolution
- Magnetic scanning
- Extremely rugged multiturn absolute encoder with up to 26 bits
- Solid shaft with face mount or servo flange, blind hollow shaft, adapter accessories
- Zero-set and preset functions via hardware/software
- Communication interface: SSI, DeviceNet, PROFIBUS DP or CANopen
- Electronically adjustable, configurable resolution
- Magnetic scanning