Contact
Feedback

Incremental encoders
DBS36 Core

The MultiFit Incremental Encoder

Your Benefits

  • The universal cable outlet allows for use in tight spaces and for flexible cabling
  • Face mount flange with various mounting hole patterns provides high flexibility when mounting in existing and new applications
  • Face mount flange with servo groove makes mounting with servo clamps possible
  • The universal stator coupling of the DBS36 Core allows for easy device replacement without adapting the application
  • Shafts in metric and US design enable worldwide use
  • The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
  • Long-term and reliable operation thanks to a high enclosure rating, temperature resistance and bearing lifetime

Overview

The MultiFit Incremental Encoder

The DBS36 Core incremental encoder features impressively high mechanical flexibility, excellent technical properties, and a number of variations. A blind hollow shaft with a shaft diameter of up to 8 mm and a face mount flange with 6 mm and 1/4" solid shaft are available. The design with face mount flange offers 2 different flanges with 6 different mounting hole patterns and a servo groove for mounting with servo clamps. The hollow shaft design has a universal stator coupling that can be used for multiple typical mounting hole circles. All models have compact dimensions and a universal cable outlet that allows for cables to run in an axial or radial direction.

At a glance
  • Connection with universal cable outlet
  • Designs with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 6 mounting hole patterns and servo groove
  • Hollow shaft with universal stator coupling
  • Compact housing diameter of 37 mm with compact construction depth,
  • Electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
  • Number of lines: 10 to 2,500
  • Temperature range: –20 °C ... +85 °C
  • Enclosure rating: IP 65

 

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Pulses per revolution0 ... 2,500
    Mechanical design

    Blind hollow shaft

    Solid shaft, with key seat servo flange

    Solid shaft, face mount flange

    Shaft diameter
    Blind hollow shaft8 mm
    Solid shaft, with key seat servo flange6 mm
    Solid shaft, face mount flange1/4" / 6 mm
    Connection type

    Cable, 8-wire, universal

    Cable, 5-wire, universal

    Cable, 8-wire, with male connector, M12, 8-pin, universal

    Cable, 8-wire, with male connector, M23, 12-pin, universal

    Communication interfaceIncremental
    Communication Interface detail

    TTL / RS-422

    HTL / Push pull

    Open Collector

    Supply voltage

    4.5 ... 5.5 V

    7 ... 30 V

    7 ... 27 V

    4.5 ... 30 V

    Enclosure ratingIP65
    Programmable
    Output frequency≤ 300 kHz
    Operating temperature range

    –20 °C ... +85 °C

    –20 °C ... +70 °C

All technical data can be found accompanying the individual product

Downloads

TOP