Transmittance dust measuring devices
Maintaining a clear sightline even when dust concentrations are high
Transmittance dust measuring devices transmit light through the entire duct. With this type of measurement, light attenuation indicates the concentration of dust inside the duct. These measuring devices are specially designed for medium to high dust concentrations and large duct diameters. Consequently, they are equally suited to emission and process monitoring as they are to hall monitoring applications.
Filter by:
4 results:
Product family
DUSTHUNTER C200
Two-in-one – dust measuring device with transmittance and scattered light measurement
- Combination of transmittance and scattered light measurement
- For very low to high dust concentrations
- Automatic check of zero and reference point
- Contamination monitoring and compensation on both sides
- Automatic self-alignment
- For medium to large duct diameters
Product family
DUSTHUNTER T200
The type approved transmissiometer with self-alignment function
- Integrated contamination check for sender/receiver and reflector unit
- Automatic self-alignment of the optical assembly
- Automatic check of zero and reference point
- For medium to high dust concentrations
- For small to large measuring distances
Product family
DUSTHUNTER T100
The type approved transmissiometer with emission monitoring
- For medium to high dust concentrations
- On-board contamination check
- Automated thorough check of zero and reference point
- For small to large measuring distances
Product family
DUSTHUNTER T50
The transmissiometer for monitoring dust concentrations
- For medium to high dust concentrations
- Automated thorough check of zero and reference point
- For low to medium measuring distances