Modules and gateways

Show all Hide all
Filter by:

75 results:

Result 1 - 24 out of 75

  • Accessory family: Fieldbus modules
  • Description: EtherCAT IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: Features: Profibus DP-V1 slave, transmission rate of 9.6 kbit/s – 12 Mbit/s, D-Sub connection (RS485), 9-pin, Profibus, M8 connection, 4-pin, access to all parameters of the connected sensors possible. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherCAT coupler for WLL180T, KTL180 and AOD1. Features: EtherCAT, transmission rates of up to 100 Mbaud, M12 EtherCAT connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: PROFINET coupler for WLL180T and AOD1. Properties: PROFINET IRT, transmission rates of 10 MBaud - 100 MBaud, M12 connection, M8 voltage supply connection, 4-pin, only output of switching output Q1 of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Compact connection module for wiring the voltage supply, I/Os, serial data interface and encoder. Intended for use with Bulkscan® LMS511. The mounting bracket with part no. 2059271 is required to connect the sensor.
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Ranger E/D connection terminal, screw connectors for fast I/O and encoder connection, DSUB for camera connection and plug for 24 V power supply
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Mini evaluation unit, OD5000 and OL1, slave, 3 x Q, 1 x analog, open end cable, 2 m
Details
Compare now
Piece
  • Accessory family: Cloning module
  • Description: IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A)
Details
Compare now
Piece
  • Accessory family: Interface modules
  • Description: Interface module for DME, DIN rail mount, DB9 female connector,wiring terminals
Details
Compare now
  • Accessory family: Connection modules
  • Description: Outdoor Ethernet-Switch, 8 ports, operating temperature range –40 °C ... +75 °C
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Indoor Ethernet-Switch, 8 ports, operating temperature range 0 °C ... +55 °C
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: Evaluation unit: OD Precision, 5 x NPN
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: Evaluation unit: OD Precision, 5 x PNP
Details
Compare now
Piece
  • Accessory family: EFI gateways
  • Description: PROFINET PROFIsafe
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: IO-Link V1.1 Class A port, USB2.0 port, optional external power supply 24V / 1A
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: External CAN expansion module for up to 8 additional digital outputs, IP 20
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Connection box for power, I/O and RS-232/RS-422 data (not Ethernet), with three prewired M12 cables, 8-pin, intended for use with LMS511 Lite and LMS531 Lite
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: PROFINET coupler for WLL180T, KTL180 and AOD1. Features: PROFINET IRT, transmission rates 10 Mbaud – 100 Mbaud, M12 PROFINET connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Relay connection box for wiring voltage supply and I/Os as well as four volt-free outputs, with cover contact.
Details
Compare now
Piece
  • Accessory family: Interface modules
  • Description: Enables access to the device data of IO-Link sensors originating from third-party tools, compatible with FieldEcho®
Details
Compare now
Piece
  • Accessory family: Power supply modules
  • Description: NAMUR isolating amplifier, Cable fault detection, Switching outputs: 2 NO relay (1 per channel), Supply voltage: 24 V ... 230 V, Voltage type: AC/DC
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Motor feedback splitter box: facility for connecting an encoder/a motor feedback system. Connection to Motion Control Modules FX3-MOC: female connector, D-Sub HD, 15-pin. Connection for additional motor feedback splitter box: female connector, D-Sub HD, 9-pin.
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Network switch for MSC800 for image output
Details
Compare now
  • Accessory family: Fieldbus modules
  • Description: Profibus coupler for WLL180T or OD Mini. Features: Profibus DP-V0 slave, transmission rates of 9.6 kbit/s – 12 Mbit/s, D-Sub connection (RS485), 9-pin, Profibus, M8 connection, 4-pin, only output of the switching output of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece

Result 1 - 24 out of 75