Please note:
The sensor is equipped with a special Smart Task function. Additional information can be found in the “Technical Data.” Use of the sensor for pure object detection is limited.
1) Object with 90% remission (based on standard white, DIN 5033).
2) Average service life: 50,000 h at TU = +25 °C.
Safety-related parameters
MTTFD
634 years
DCavg
0 %
TM (mission time)
20 years
Communication interface
Communication interface
IO-Link V1.1
Communication Interface detail
COM2 (38,4 kBaud)
Cycle time
2.3 ms
Process data length
16 Bit
Process data structure
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 ... 15 = measuring value
VendorID
26
DeviceID HEX
0x8000EC
DeviceID DEC
8388844
Electrical data
Supply voltage UB
10 V DC ... 30 V DC 1)
Ripple
< 5 Vpp2)
Current consumption
45 mA 3)
Protection class
III
Digital output
Type
PNP
Signal voltage PNP HIGH/LOW
> Uv - 2,5 V / ca. 0 V
Output current Imax.
≤ 100 mA
Repeatability (response time)
100 µs 4)
Switching frequency
1,500 Hz
Switching mode
Light/dark switching
Circuit protection
A 5)
B 6)
C 7)
D 8)
Response time Q/ on Pin 2
200 µs ... 300 µs 4)9)
Switching frequency Q / to pin 2
≤ 1,500 Hz 10)
1) Limit values when operated in short-circuit protected network: max. 8 A.
2) May not exceed or fall below Uv tolerances.
3) Without load.
4) Valid for Q \ on Pin2, if configured with software.
5) A = VS connections reverse-polarity protected.
6) B = inputs and output reverse-polarity protected.
7) C = interference suppression.
8) D = outputs overcurrent and short-circuit protected.
9) Signal transit time with resistive load.
10) With light / dark ratio 1:1, valid for Q \ on Pin2, if configured with software.
Mechanical data
Housing
Rectangular
Dimensions (W x H x D)
15.6 mm x 48.5 mm x 42 mm
Connection
Male connector M12, 4-pin
Material
Housing
Metal, zinc diecast
Front screen
Plastic, PMMA
Weight
120 g
Ambient data
Enclosure rating
IP66
IP67
Ambient operating temperature
–40 °C ... +60 °C
Ambient temperature, storage
–40 °C ... +75 °C
UL File No.
NRKH.E181493 & NRKH7.E181493
Smart Task
Smart Task name
Counter + debouncing
Logic function
Direct
WINDOW
Hysteresis
Timer function
Deactivated
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter
Yes
Maximum counting frequency
SIO Direct: --- 1)
SIO Logic: 1000 Hz 2)
IOL: 650 Hz 3)
Counter reset
SIO Direct: ---
SIO Logic: 1,5 ms
IOL: 1,5 ms
Min. Time between two process events (switches)
SIO Direct: ---
SIO Logic: 500 µs
IOL: 800 µs
Debounce time max.
SIO Direct: ---
SIO Logic: 30.000 ms
IOL: 30.000 ms
Switching signal
Switching signal QL1
Output type (dependant on the adjusted threshold)
Switching signal QL2
Output type (dependant on the adjusted threshold)
Measuring value
Counting value
1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deactivated").
2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
