Further accessories
For all manner of requirements
580 results:
- Description: Programming unit display for programmable SICK DFS60, DFV60, AFS/AFM60, AHS/AHM36 encoders, and wire draw encoder with DFS60, AFS/AFM60 and AHS/AHM36. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-10-Pro stand-alone programming tool,4 x alkaline type batteries, 1.5 V Mignon (AA)
- Description: Programming tool for ATM60, ATM90, and KH53
- Items supplied: Power supply, interface, link cable, encoder cable, and software
- Description: USB programming unit, for programmable SICK encoders AFS60, AFM60, DFS60, VFS60, DFV60 and wire draw encoders with programmable encoders
- Description: SVip® LAN programming tool for all motor feedback systems
- Items supplied: 1x programming tool PGT-11-S LAN, 1x power supply unit 100-240 V AC / 12 V DC, primary adapter (Europe, UK, USA/Japan, Australia), Ethernet cable 3 m
- Description: Hand-held programming device for the programmable SICK AHS/AHM36 CANopen encoders, TMS/TMM61 CANopen inclination sensors, TMS/TMM88 CANopen, TMS/TMM88 Analog, and wire draw encoders with AHS/AHM36 CANopen. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-12-Pro standalone programming tool, 4 x 1.5 V (AA) alkaline mignon batteries
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Male connector, M12, 8-pin, radial
- Resolution in pulses/mm: 3.41
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Cable, 8-wire, universal, 1.5 m
- Resolution in pulses/mm: 3.41
- Description: Rigid actuator, can be inserted into the locking device from the front or side
- Description: Muting arm for active unit with mounted muting sensors with cable
- Description: Cable cover for muting arms, 4 pieces, length 400 mm, suitable for 2111923 and 2111924
- Description: nanoScan3 optics cover spare part set with seal and screws
- Accessory family: Vent tube filter
- Description: Protection filter for connection cable. Prevents humidity from entering the ventilation tube of the connection cable. For self-mounting at cable end.
- Description: Self ejecting against simple manipulation
- Design: Straight
- Actuation option: Rigid
- Description: Muting lamp
- Items supplied: Including M12 male connector and connection cable (2 m), mounting bracket and mounting kit
- Description: Door hinged on left/right
- Design: Rigid
- Actuation option: Semiflexible
- Items supplied: Including two safety screws
- Description: Transverse
- Design: Angled
- Actuation option: Rubber-mounted
- Items supplied: Including two safety screws