Contact
Feedback

Level sensors

Intelligent solutions for level and point level measurement

Whether for continuous level measurement, point level measurement or both – SICK offers a wide range of solutions for process engineering, storage, and protection. Based on the installation situation, medium properties, and ambient conditions, SICK provides sensors that ensure efficient processes. As the provider of one of the broadest technology portfolios, SICK brings its knowledge to the forefront.

Filter by:

9 results:

Result 1 - 9 out of 9

View: View Gallery View List
Product family LFP Inox
The clean solution
  • Level measurement in hygienic applications
  • Rod probe can be cut to length manually up to 4,000 mm long with Ra ≤ 0.8 µm
  • Process temperature up to 180 °C, process pressure up to 16 bar
  • CIP/SIP-resistant
  • High enclosure rating: IP 67 and IP 69K, autoclavable
  • Interchangeable hygienic process connections
  • 3 in 1: combines display, analog output, and binary output
  • Remote amplifier with process connection
  • IO-Link 1.1
Product family LFP Cubic
Flexible up to the probe tip
  • Level sensor for liquids
  • No mechanical moving parts
  • Interchangeable rod probe which can be cut to lengths between 200 mm and 2,000 mm (cable probe up to 4,000 mm)
  • Resistant to deposit formation
  • Process temperature up to 100 °C,process pressure up to 10 bar
  • 3 in 1: combines display, analog output (according to NAMUR NE 43), and binary output
  • High enclosure rating of IP 67, rotatable housing and remote amplifier
  • IO-Link 1.1
Product family LFV200
The Point Level Sensor for all kinds of liquids
  • Housing made of 316L stainless steel
  • Two electrical output versions available
  • Commissioning without filling
  • Process temperature up to 150 °C
  • Immune to deposit formation
  • Very high repeatability
  • Aseptic versions with polished surface, CIP and SIP resistant
  • Tube extension up to 1,200 mm
Product family LFV300
Flexible and robust – Tuning Forks for all kinds of liquids
  • Choice of various housing materials and electrical output signals
  • Commissioning without filling
  • Process temperature up to 250 °C
  • Immune to deposit formation
  • Very high repeatability
  • Hygienic designs according to EHEDG and FDA, compatible for CIP and SIP
  • ATEX approval available
  • Tube extension up to 6 m in length

Product family LBV300

Tuning forks – tough and flexible in bulk

Solids

  • Tough device design
  • Several housing materials and electrical outputs available
  • Immune to deposit formation
  • Commissioning without filling
  • Process temperature up to 250 °C
  • Very high repeatability
  • ATEX versions (1D/2D/1G/2G) available
  • Tube-extended version (LBV330) up to 6 m and rope extensions version (LBV320) up to 80 m available for vertical mounting

Product family LBV301
Rugged, flexible and cleanable
  • Compact sensor from 1 thread
  • Monoprobe design prevents bulk materials from sticking or jamming
  • Polished monoprobe for food applications
  • Commissioning without filling and medium calibration
  • Process temperature up to 250 °C
  • ATEX certifications (1D/2D/1G/2G) available
  • Tube extension variant (LBV331) up to 6 m and cable extension model (LBV321) up to 80 m available for vertical mounting
Product family UP56
Tough, non-contact, pressure-resistant
  • Non-contact measurement up to 3.4 m operating distance / 8.0 m scanning distance limit
  • Pressure resistant up to 6 bar
  • Converter protected by PVDF cover for increased resistance
  • 3-in-1: Continuous measurement, switching signal, and display
  • Analog output can be switched 4 mA ... 20 mA and 0 V ... 10 V
  • Process connector thread G 1 and G 2
  • IP67 enclosure rating
  • Simple operation, also via Connect+
Product family MHF15
Simple, compact, and rugged
  • Robust level monitoring in liquid without additional requirements
  • Small, compact design, no medium calibration required
  • Process temperature up to 55 °C, process pressure up to 16 bar
  • IP 67 and IP 69K enclosure rating
  • Process connection G ½
  • Highly medium resistant due to stainless steel housing 1.4404, polysulfone apex
  • Output available as PNP or NPN transistor
  • FDA-compliant, UL
Product family UP56 Pure
Pure reliability
  • Ultrasonic level sensor with very high chemical resistance
  • Non-contact measurement in immersion pipe of up to 1,500 mm
  • PTFE-coated membrane and GF D40 process connection made of PTFE
  • Pressure resistant up to 6 bar, temperature resistant up to 85°C
  • Different sizes available
  • Analog output selectable between 4 mA to 20 mA and 0 V to 10 V
  • Switching output for monitoring the maximum and minimum limit

Result 1 - 9 out of 9

TOP