Adaptor
The right connection
116 results:
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 6-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: Female connector, M12, 5-pin, straight, A-coded
- Connection type head B: Female connector, M12, 5-pin, straight, A-coded, Male connector, M12, 5-pin, straight, A-coded
- Signal type: CAN, Power
- Cable: 0.5 m, 5-wire
- Description: CAN, Y-CAN cable, Power
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 4-pin
- Number of slots: 8
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 18-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 12-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 4-pin
- Number of slots: 10
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 22-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 10-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 8-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Accessory family: Other adapters
- Description: Connector for cascading safe multibeam scanners Connection option for 2 scanGrid2 units or connection option for 1 scanGrid2 unit and 1 additional Multi Sensor Connector.
- Accessory family: Other adapters
- Connection type head A: Female connector, terminal strip, 7-pin, straight
- Connection type head B: Male connector, M12, 5-pin, straight
- Description: Adapter for connecting a deTec4 Core sender or receiver (M12 male connector, 5-pin) to the available MSL FGS terminal compartment
- Accessory family: Other adapters
- Connecting cable: 2.25 m
- Connection type head A: Infrared head, IEC 1107
- Connection type head B: Male connector, USB 2.0
- Description: Infrared/USB adapter HIE-04, Data transfer up to 38400 baud, USB 2.0, cable length 2,25 m, ATEX II 2G Ex mb IIC T4, Protection class IP30, Operating temperature –25 to +60°C
- Connection type head A: Female connector, M12, 5-pin, A-coded
- Connection type head B: Male connector, M12, 5-pin, A-coded
- Connection type head C: Female connector M12 A-coded
- Description: T-piece for simultaneous connection to sender and receiver, splits the cable from the control cabinet to the sender and receiver
- Note: 5-pin
- Accessory family: Other adapters
- Note: C4000 Standard (not cascading) receiver to FGS/MGS receiver
- Accessory family: Other adapters
- Note: Terminal with 182 Ohm resistance, for pin 9 and 10 on the system connection, to improve the EMC behaviour if the EFI interface is not used
- Connection type head A: Male connector, M12, 4-pin, A-coded
- Connection type head B: Female connector, M12, 4-pin, A-coded
- Connection type head C: Female connector M12 4-pin A-coded
- Signal type: Sensor/actuator cable
- Cable: 0.11 m, PVC
- Description: Sensor/actuator cable, Y-Junction, 2 x female connector M12, 4-pin, straight, 0.11 m PVC-cable, 1 x male connector M12, 4-pin, straight, to connect SICK Sensors with SICK Smart Sensors
- Note: T-coupler 2 x M12 female + M12 male straight with cable
- Connection type head A: Male connector, M12, 4-pin, A-coded
- Connection type head B: Female connector, M12, 4-pin, A-coded
- Connection type head C: Female connector M12 4-pin A-coded
- Signal type: Sensor/actuator cable
- Cable: 0.11 m, PVC
- Description: Sensor/actuator cable, Y-distribution, 2 x M8 female connectors, 4-pin, straight, 0.11 m, PVC cable, 1 x M12 male connector, 4-pin, straight, connects a SICK sensor to a SICK Smart sensor, Female connector brassed (A): Auxiliary sensor, Female connector nickel-plated (B): Smart Sensor, Male connector nickel-plated (C): IO-Link master/ PLC
- Note: Slimline T-piece, 2 x M8 female connector + M12 male connector with cable
- Accessory family: Other adapters
- Description: C4000 Standard (Non-Cascadable) Sender to FGS Sender