Further accessories
For all manner of requirements
482 results:
- Description: USB programming unit, for programmable SICK encoders AFS60, AFM60, DFS60, VFS60, DFV60 and wire draw encoders with programmable encoders
- Description: Programming unit display for programmable SICK DFS60, DFV60, AFS/AFM60, AHS/AHM36 encoders, and wire draw encoder with DFS60, AFS/AFM60 and AHS/AHM36. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-10-Pro stand-alone programming tool,4 x alkaline type batteries, 1.5 V Mignon (AA)
- Description: Programming tool for ATM60, ATM90, and KH53
- Items supplied: Power supply, interface, link cable, encoder cable, and software
- Description: SVip® LAN programming tool for all motor feedback systems
- Items supplied: 1x programming tool PGT-11-S LAN, 1x power supply unit 100-240 V AC / 12 V DC, primary adapter (Europe, UK, USA/Japan, Australia), Ethernet cable 3 m
- Description: Hand-held programming device for the programmable SICK AHS/AHM36 CANopen encoders, TMS/TMM61 CANopen inclination sensors, TMS/TMM88 CANopen, TMS/TMM88 Analog, and wire draw encoders with AHS/AHM36 CANopen. Compact dimensions, low weight, and intuitive operation.
- Items supplied: 1 x PGT-12-Pro standalone programming tool, 4 x 1.5 V (AA) alkaline mignon batteries
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Cable, 8-wire, universal, 1.5 m
- Resolution in pulses/mm: 3.41
Measuring wheel encoders
DFV60
- Measuring wheel circumference: 300 mm
- Measuring wheel surface: O-ring NBR70
- Communication interface: 10 V ... 32 V, Incremental, HTL, Push pull
- Supply voltage: 10 V ... 32 V
- Connection type: Male connector, M12, 8-pin, radial
- Resolution in pulses/mm: 3.41
Sensor Visualization
SLT
- Product category: LED signal lamp
- Further functions: IO-Link signal lamp, Parameterization via IO-Link, Simple configuration directly via the SOPAS ET user interface, the engineering tool from SICK
- Description: Rigid actuator, can be inserted into the locking device from the front or side
- Accessory family: Rechargeable batteries
- Description: Replacement rechargeable lithium ion battery (2,450 mAh) for wireless mobile hand-held scanner HW1991/HW1911 (Honeywell BATSCN05)
- Accessory family: Base stations
- Description: Charging/Communication station for HW1911 / HW1991, Bluetooth class 1, 100 m, host interfaces: RS-232 / USB / KBW (Honeywell CCB22-100BT-03N)
- Items supplied: Accessories not included with delivery, please order seperately.
- Description: Spare part set optics cover with replacement seal and screws
- Accessory group: Signal and status indicators
-
Description:
Signal lamp (red, yellow, green), including 98 dB buzzer, adjustable levels for visual and acoustic warning,
24 V, M12 connection, including accessories for mounting
- Description: EcoLine wire draw mechanism for servo flange with 6 mm shaft, measuring range 0 m ... 1.25 m
- Items supplied: Without encoder
- Accessory group: Magnets
-
Description:
Neodym
- Note: Direct or indirect sale of the Neodym magnets we supply or end products manufactured from these magnets is prohibited in the following countries: USA, Canada and Japan.
- Description: Additional board for connecting a bar code scanner with heater in combination with CDM-420
- Description: Universal holder for round steel arms and muting arms, for mounting sensors or reflectors
- Description: Adapter D60 to D50 for blower outlet, 10m air hose, 50mm, adapter D50 to D40, 2 pc. Hose clamp D50
- Description: Replacement actuator for STR1-SASxxxxx (compatible with all STR1 sensors)
- Design: Standard
- Description: Replacement actuator for STR1-SAFxxxxx (compatible with all STR1 sensors)
- Design: Flat
- Description: Replacement actuator for STR1-SAMxxxxx (compatible with all STR1 sensors)
- Design: Mini
- Accessory family: Other adapters
- Description: The M12 8-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.