Filter by:
670 results:
Reliable dust measurement in wet gases
- For very low to medium dust concentrations
- Gas sampling and return combined in one probe
- Contamination check
- Automatic monitoring of zero and reference point
- Easy parameterization and convenient operation – optionally via supplemental remote unit
- Integrated system diagnostics for early detection of maintenance requirements
The essentials taken to the max
- Can be used in all standard cylinders, linear slides, and grippers using the T-slot and – with the help of adapters – in round rod, tie-rod, and profile cylinders, and cylinders with a dovetail groove
- Drop-in mounting from above simplifies handling and assembly
- Combined fixing screw (hexagon socket screw and slotted screw)
- LED for indicating the output state
- Enclosure rating: IP 67
The essentials taken to the max
- Can be used in all standard cylinders, linear slides, and grippers using the T-slot and – with the help of adapters – in round rod, tie-rod, and profile cylinders, and cylinders with a dovetail groove
- Drop-in mounting from above simplifies handling and assembly
- Combined fixing screw (hexagon socket screw and slotted screw)
- LED for indicating the output state (depending on type)
- Enclosure rating: IP 67
- Supply voltage up to 230 V
Slim photoelectric sensors reliably detect transparent objects
- Continuous threshold adaption of the switching threshold compensates for environmental changes
- Single-lens autocollimation optics
- Simple setting either via teach-in pushbutton, cable or IO-Link
- PinPoint LED technology with a small, highly visible, well-defined light spot enables high reserve levels when using small reflectors
- Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link
Reliable detection of transparent objects
- Hygienic designed stainless steel housing and accessories (316L/1.4404)
- Hygienic mounting using M12-adapter thread or D12-adapter shaft
- IP 66, IP 67, IP 68 and IP 69K enclosure rating and Ecolab certified
- Resistant to a variety of common cleaning and disinfection agents
- PinPoint LED technology provides a highly visible laser-like light spot
- Teach-in stainless steel metal membrane or external teach-in
Worldwide revolutionary safety solution for line-guided small vehicles
- The world’s first LiDAR multibeam scanner with safe solid state technology
- Perfectly designed for the requirements of line-guided AGCs: PL c, 1.1 m scanning range, 150° scanning angle
- Compact – only 43 mm high
- Diagnostic data and clone function for configuration via the Safety Assistant app and the Safety Designer software
High-performance fiber-optic sensor with world’s fastest response time
- Selectable response time up to 16 µs
- Sensing range up to 20 m (through-beam system); up to 1,400 mm (proximity system)
- Bus-compatible with anti-interference
- 2 x 4-digit digital display
- Adjustable hysteresis
- Rotatable display screen
- High-resolution signal processing
- Programmable time delays
Flexible, smart, compact: Encoders for countless fields of application
- 36 mm absolute encoder with maximum 26 bits (singleturn: 14 bits multiturn: 12 bits)
- Face mount flange, servo flange, blind hollow shaft
- Rotatable male connector or cable connection
- IO-Link, CANopen, SSI interface with programmable parameterization
- Diagnostic functions
- Stainless steel (Inox versions)
- IP67 to IP69K protection class
Proven measurement technology for flue gas monitoring
- Measurement of up to 10 IR components plus O2 and TOC
- Hot/wet extractive measurement technology
- Wear-free gas distribution through ejector pumps
- Reference point monitoring with internal calibration cells
- Certified digital Modbus® interface
- Web server for platform-independent device control
- Use of dry test gases for HCl and NH3
The safety laser scanner for outdoor automation
- Certified in accordance with ISO 13849 and IEC 62998 for protecting people indoor and outdoor
- Outdoor safeHDDM® scanning technology
- Individual field settings
- Optimized product design for outdoor use
- Protective field range: 4 m
- Up to 128 freely configurable fields
- Safe networking with Flexi Soft safety controller
Compact rectangular housings for use in harsh ambient conditions
- Type: 40 mm x 40 mm
- Extended sensing ranges: 20 mm to 40 mm
- Electrical configuration: DC 3-/4-wire
- Enclosure rating: IP 68, IP 69K
- Temperature range: –25 °C to +85 °C
- Plastic housing
- Push-lock mounting system
- Sensor head can be rotated in five directions
The tailored safety solution
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Modular, expandable housing design with reliable ABS plastic
- No blind zones
- Protective field heights between 210 mm and 1,050 mm
- Scanning range: 0.4 m to 3.2 m
- Resolution: 17 mm and 30 mm
- Direct mounting or with alignment brackets
- Adapter for laser alignment aid AR60
Custody transfer measurement in natural gas distribution
- Cutting-edge technology: ultrasound
- Diagnostics and permanent operational check
- Rugged and reliable due to lack of moving parts
- Exchangeable cartridge
- Straight inlet/outlet zone not required
- Overload-proof
- Optional integrated flow conversion / date registration
- Battery or intrinsically safe power supply
Flexible in use for length, width and height measurements
- Beam separation: 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, 50 mm
- Operating range: 12 m
- Functions: Cross beam measurement, 4 x zone measurement, high-speed scan, transparent mode
- Interfaces: PNP, analog, RS485, IO-Link, PROFINET, PROFIBUS, EtherCAT®, EtherNet/IPTM, CANopen
- Sun resistance mode with reliable switching threshold
Early and reliable fire detection in tunnels
- Visibility (K value) measured according to the scattered light measurement principle
- Highly available – no moving parts
- Quick and reliable smoke detection
- Software developed in accordance with EN 61508 (SIL1)
- Low faulty alarm rate
- IP 6K9K enclosure rating thanks to a rugged stainless-steel housing
- Fog evaporation through integrated heating element (optional)
Round, short and economically unbeatable
- Low-cost cylindrical M18 sensor with extra short housing
- Five different housing styles
- Variety of plastic and metal housing styles, with straight or right angle optics
- Bright and highly visible PinPoint-LED
- Potentiometer for adjustment of switching threshold (depending on type)
- Special flush type, one-piece metal housing
- Highly visible signal indicator LED
- IP 67 rating
Modular wire draw encoder in miniature design
- Measured lengths: 1.25 m ... 10 m
- Modular measuring system with a wide selection of interfaces/measuring lengths
- Very small, slim housing (55 mm ... 190 mm) with spring integrated in the measurement drum
- Light yet shock-proof and temperature-resistant plastic housing
- Analog interface with teach-in function at the encoder
The highflier in intelligent automation
- Technologies: ForegroundSuppression, DoubleLine, V-optics and MultiSwitch
- Two switching points and distance value output in one device
- Diffuse sender LED for ambient light suppression
- BluePilot: Teach-Turn adjustment with optical sensing range and alignment aid
- Smart Sensor: Latest diagnostics and monitoring functions
- VISTAL® housing
Highest reliability, maximum resistance and endless possibilities
- Smooth stainless steel housing (316L/1.4404)
- Hygienic mounting using M12-adapter thread or D12-adapter shaft
- IP 66, IP 67, IP 68 and IP 69K enclosure rating and Ecolab certified
- Resistant to a variety of common cleaning and disinfection agents
- Highly visible laser-like light spot due to PinPoint LED
- Teach-in via stainless steel pushbutton with a metal membrane
- Flexible sensor settings, monitoring, advanced diagnostics, and visualization thanks to IO-Link
The motor feedback solution for large hollow shaft motors and direct drives
- Singleturn and multiturn variants with 50 mm hollow shaft
- 64 sine-cosine periods per revolution, additionally 4,096 revolutions with the multiturn variants
- HIPERFACE® interface with extended type label
- Maximum speed: 6,000 rpm
- Easy mounting without special mounting tools
- High shock and vibration resistance
High-resolution, programmable encoder for sophisticated applications
- Short installation depth
- High resolution of up to 16 bits
- Optional programming: Output voltage, zero pulse position, zero impulse width, pulse number and counting direction
- Connection: Radial or axial cable connection, M23 or M12 male connector, axial or radial.
- Electrical interfaces: 5 V & 24 V TTL/RS-422, 24 V HTL/push pull, 5 V sin/cos 1 Vss
- Mechanical interfaces: Face mount flange or servo flange, blind hollow shaft or through hollow shaft
- Remote zero set possible
Mechanical bolt for rugged door safeguarding and high machine uptime
- Rugged design
- Variants with ANSI-compliant locking mechanism
- Standardized frame plates suitable for many safety switches from SICK
- Horizontal installation tolerance of 27 mm
- Compensation of vertical door offset up to ± 7 mm
- Variants with catch release button and emergency release
Safe and easy position monitoring up to PL d
- Rectangular type: 12 mm x 26 mm x 40 mm
- Response range: 4 mm
- Two OSSD safety outputs
- Enclosure rating: IP67
- Temperature range: –25 °C bis +70 °C
- Rugged VISTAL® housing
- Up to performance level PL d (EN ISO 13849)
- Connection variants: M8 male connector, cable or cable with M12 male connector
Outstanding performance in miniature format
- Ultra-thin housing for the tightest of installation spaces
- BGS: Object detection starting from just 8 mm
- Detection of objects from 0.1 mm in size
- Reliable detection of jet-black, specular, transparent, and shiny objects
- PinPoint LED
- VISTAL® housing, steel mounting plates
- Can be adjusted individually to OEM requirements