Contact

Linear encoders
MAX48

Integrated cylinder position measurement for mobile machines

Your Benefits

  • Magnetostriction: Reliable, safe and wear-free
  • 100% mechanical and electrically compatible with existing cylinder constructions
  • Save-spacing installation: Better utilization of the piston stroke in tight installation space of the cylinder
  • Extremely stable signal behavior and very good EMC properties: Resistant to extreme electrical influences, such as radiated or coupled faults in the on-board power supply
  • Status monitoring: Monitoring of piston strokes, operating hours and max. oil temperature provides a statement about the cost-optimized operation of the machine
  • Favorable cost-benefit ratio

Product selection

MAX48.ui.config.teaser.header.msg

Individual product configuration

MAX48.ui.config.teaser.configuration.msg

Standard products

Select your desired product from our product range.

Show all Hide all
Show all Hide all
Filter by:

Your desired configuration is being checked...

The configuration result cannot yet be generated. Please complete the missing inputs - the exclamations marks show the missing inputs, or you can contact us.

182 results:

Result 1 - 24 out of 182

View:

1107087
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 190 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 410 mm
  • Damping: 30 mm
  • Connection type: Connecting cable, 3-wire, 2,000 mm
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1107213
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 610 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1219818
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 250 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222685
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: SAE J1939
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222681
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=SIG, 3=GND, 4=n.c.
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222680
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222800
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 270 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222683
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 300 mm
  • Damping: 30 mm
  • Connection type: Connecting cable, 3-wire, 300 mm
  • Communication interface: PWM
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222611
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 2,000 mm
  • Damping: 36 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222818
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 270 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222682
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222593
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 400 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 12 V DC (8 ... 16 V DC)
  • PIN and wire assignment: 1=VDC, 2=SIG, 3=GND, 4=n.c.
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222684
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 200 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222353
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 180 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222509
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 400 mm
  • Damping: 63 mm
  • Connection type: Connecting cable, 3-wire, 2,000 mm
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222361
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 800 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222360
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 1,200 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222515
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 575 mm
  • Damping: 36 mm
  • Connection type: Connecting cable, 3-wire, 3,000 mm
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222391
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 105 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222473
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 1,592 mm
  • Damping: 36 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222545
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 240 mm
  • Damping: 63 mm
  • Connection type: Connecting cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222544
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 220 mm
  • Damping: 36 mm
  • Connection type: Male connector, M12, 4-pin
  • Communication interface: Analog
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=VDC, 2=SIG, 3=GND, 4=n.c.
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now
1222571
MAX48
Linear encoders
  • Diameter of the pressure pipe: 10 mm
  • Measuring range: 0 mm ... 260 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin
  • Communication interface: CANopen
  • Supply voltage: 24 V DC (8 ... 36 V DC)
  • PIN and wire assignment: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Resolution: Typ. 0.1 mm (noise-free)
Details
  • Compare now

Result 1 - 24 out of 182

    Overview

    Integrated cylinder position measurement for mobile machines

    The MAX48 linear encoder enables non-contact, completely integrated and absolute position measurement in hydraulic cylinders. Suitable for use under extreme ambient and operating conditions in applications in mobile machines. The innovative technology of magnetostriction offers high reliability, expanded diagnostic functions and well as a considerable reduction in operating costs. The 48 mm housing can be easily installed in the existing cylinder construction. All in all, linear encoders from SICK impress with their attractive cost-benefit ratio.

    At a glance
    • Measuring range: 50 to 2,500 mm (1 mm steps), typical resolution 0.1 mm
    • Analog, CANopen, SAE J1939 and PWM interfaces are available
    • Pressure-resistant housing, designed for hydraulic operating pressure of up to 400 bar
    • High operating temperature (electronics) up to +105 °C
    • Fluid temperature (hydraulic oil) up to max. +95 °C
    • Compact dimensions: 10 mm installation space, 30 mm damping zone
    • Position magnet does not need a spacer disk

    Applications

    Technical overview

     
    • Technical data overview

      Technical data overview

      Measuring length50 mm ... 2,500 mm
      Measuring range50 mm ... 2,500 mm
      Communication interface

      Analog

      CANopen

      SAE J1939

      PWM

      Connection type

      Male connector, M12, 4-pin

      Connecting cable, 3-wire, 300 mm

      Connecting cable, 3-wire, 1,000 mm

      Connecting cable, 3-wire, 500 mm

      Connecting cable, 3-wire, 750 mm

      Connecting cable, 3-wire, 2,000 mm

      Connecting cable, 3-wire, 10,000 mm

      Connecting cable, 3-wire, 3,000 mm

      Male connector, M12, 5-pin

    All technical data can be found accompanying the individual product

    Downloads

TOP