Contact

Incremental encoders
DUS60

Encoders with versatile configuration for machine axes applications

Your Benefits

  • Quickly commission the encoder using the built-in DIP switches. No additional programming tool or laptop required
  • Status and signal LEDs quickly indicate whether the encoder is properly connected, functional, or needs to be replaced
  • Universal power supply and a rotatable connector reduce the number of variants required and provide increased installation flexibility
  • Anti-dither functionality maintains a high level of productivity also in high vibration applications
  • Compatible with existing and low-cost input cards with output types like Clockwise/Counterclockwise and Signal/Direction

Overview

Encoders with versatile configuration for machine axes applications

The DUS60 is a rotary incremental encoder with built-in DIP switch configuration for the resolution, output voltage, and counting direction. The DUS60 configuration switches reduce the number of variants, enable easy replacement and quick commissioning, and increases the likelihood that spare parts will be in stock – all without any additional programming tools. The on-board status and signal LEDs and optional fault output quickly indicate the functionality of the encoder, minimizing time required for both installation and troubleshooting. The DUS60 offers solid shaft and hollow bore mounting with rotating connectors or universal cables for quick and flexible mechanical installation. With resolutions up to 2,400 pulses, the DUS60 is ideal for factory and logistics automation applications.

At a glance
  • Solid shaft or hollow bore incremental encoder
  • DIP switches for configuring resolution, signal output,
  • And counting direction
  • Universal 4.5 V ... 30 V supply
  • LEDs that indicate encoder status and output signal
  • Rotatable M12 male connector, 4-pin or 8-pin, or universal cable outlet
  • Optional fault output directly from encoder

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Pulses per revolution0 ... 2,400
    Mechanical design

    Solid shaft, face mount flange

    Blind hollow shaft

    Through hollow shaft with rear clamping

    Through hollow shaft with front clamping

    Connection type

    Male connector, M12, 8-pin, universal

    Male connector, M12, 4-pin, universal

    Cable, 8-wire, universal

    Communication interfaceIncremental
    Communication Interface detailTTL / HTL / DIP switch, selectable output 1)
    Supply voltage4.75 ... 30 V
    Enclosure ratingIP65
    Programmable
    Output frequency≤ 60 kHz
    Operating temperature range–30 °C ... +70 °C
    • 1) The output is not selectable for DIP switch configurations E, F, and G. The output voltage value is dependent on the supply voltage.
All technical data can be found accompanying the individual product

Downloads

TOP