Contact

Incremental encoders
DBS36 Core

The MultiFit Incremental Encoder

Your Benefits

  • The universal cable connection enables the device to be used in tight spaces and provides cable routing flexibility
  • Different flanges and the universal stator coupling provides mounting without adapting the application
  • Shafts in metric and US design enable worldwide use
  • The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
  • Long-term and reliable operation thanks to a high enclosure rating, temperature resistance and bearing lifetime

Overview

The MultiFit Incremental Encoder

The DBS36 Core incremental encoder features impressively high mechanical flexibility, excellent technical properties, and a number of variations. A blind hollow shaft with a shaft diameter of up to 8 mm and a face mount flange with 6 mm and 1/4" solid shaft are available. The design with face mount flange offers 2 different flanges with 6 different mounting hole patterns and a servo groove for mounting with servo clamps. The hollow shaft design has a universal stator coupling that can be used for multiple typical mounting hole circles. All models have compact dimensions and a universal cable connection that allows for cables to run in an axial or radial direction.

At a glance
  • Universal cable connection
  • Designs with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 6 mounting hole patterns and servo groove
  • Communication interfaces: TTL/RS-422, HTL/push pull, Open Collector
  • Number of lines from 10 to 2,500 possible
  • Temperature range: –20 °C ... +85 °C
  • Enclosure rating: IP65

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Pulses per revolution0 … 2,500
    Mechanical design

    Solid shaft, Servo flange

    Solid shaft, face mount flange

    Blind hollow shaft

    Shaft diameter

    6 mm feather key groove

    1/4"

    6 mm

    8 mm 1)

    Connection type

    Cable, 8-wire, universal

    Cable, 8-wire, with male connector, M12, 8-pin, universal

    Cable, 8-wire, with male connector, M23, 12-pin, universal

    Cable, 5-wire, universal

    Communication interfaceIncremental
    Communication Interface detail

    TTL / RS-422

    HTL / Push pull

    Open Collector

    Supply voltage

    4.5 ... 5.5 V

    7 ... 30 V

    7 ... 27 V

    4.5 ... 30 V

    Enclosure ratingIP65
    Programmable/configurable
    Output frequency≤ 300 kHz
    Operating temperature range

    –20 °C ... +85 °C

    –20 °C ... +70 °C

    • 1) Collets for 5 mm and 6 mm and 1/4" as accessories, separate order item.
All technical data can be found accompanying the individual product

Downloads

TOP