Contact
Feedback

Protecting gapsbetween elevator shafts and cars

The deTec2 Core safety light curtain reliably monitors the gap between the elevator shaft and car which exists for maintenance and cleaning work. As soon as the sensor detects a person, it prevents the elevator from starting thereby protecting the service staff.

  • Following product families can be used
    Product family miniTwin2
    Small design, great flexibility, and universal possibilities
    • Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849)
    • Blind-zone-free device concept with compact cross section (15 mm x 32 mm)
    • Twin stick: sender and receiver in a single housing – cascadable
    • Tailored protective field heights in 60-mm increments: from 120 mm to 1,200 mm
    • Typical sensing ranges of 0 m ... 8 m
    • Intelligent, software-free configuration of external device monitoring and reset function
    • M12 connecting device, 5-pin
    Product family L29
    Small type for optimum integration into safety applications up to type 2
    • Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction with an external test device of the product family Flexi Classic (UE410-MU)
    • Very small housing dimensions (50 mm x 23,6 mm x 12,2 mm)
    • Ultra-rugged VISTAL™ housing
    • Ecolab tested material resistance
    • Enclosure rating IP 66, IP 67 and IP 69K
    • Temperature range from –40 °C to +60 °C
    Product family mac4
    The tailored safety solution
    • Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
    • Modular, expandable housing design with reliable ABS plastic
    • No blind zones
    • Protective field heights between 210 mm and 1,050 mm
    • Scanning range: 0.4 m to 3.2 m
    • Resolution: 17 mm and 30 mm
    • Direct mounting or with alignment brackets
    • Adapter for laser alignment aid AR60
    Product family L27
    Standard type and long ranges for safety applications up to type 2
    • Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction with suitable testing device, e.g., Flexi Classic or Flexi Soft
    • Compact size with ranges up to 35 m
    • Integrated heating
    • Enclosure rating IP 67
    • Temperature range from –40 °C to +60 °C
    Product family L28
    Compact type for optimum integration into safety applications up to type 2
    • Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849), only in conjunction with suitable testing device, e.g., Flexi Classic or Flexi Soft
    • Compact size with ranges up to 18 m
    • Plastic housing, ABS
    • Enclosure rating IP 67
    • Temperature range from –40 °C to +60 °C
TOP