Modules and gateways
A clever connection
70 results:
- Accessory family: Fieldbus modules
- Description: EtherCAT coupler for WLL180T, KTL180 and AOD1. Features: EtherCAT, transmission rates of up to 100 Mbaud, M12 EtherCAT connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
- Accessory family: Connection modules
- Description: Indoor Ethernet-Switch, 8 ports, operating temperature range 0 °C ... +55 °C
- Accessory family: Connection modules
- Description: External, passive control unit with one pushbutton and three LEDs, cable with male connector M12, 4-pin, PLC: pin 2 and pin 4 swapped, cable material: PUR, housing material: plastic, TPU, reinforced, supply voltage: DC 10 V DC ... 30 V DC, current Imax.: 510 mA, protection class: III (EN 61140), EMC: EN 61000-6-2, EN 61000-6-4, ambient temperature operation: –25 °C ... +55 °C, ambient temperature storage: –25 °C ... +70 °C
- Accessory family: Connection modules
- Description: External, passive control unit with one pushbutton and three LEDs. Cable with male connector M12, 4-pin, cable material: PUR, housing material: plastic, TPU, reinforced, supply voltage: DC 10 V DC ... 30 V DC, current Imax.: 510 mA, protection class: III (EN 61140), EMC: EN 61000-6-2, EN 61000-6-4, ambient temperature operation: –25 °C ... +55 °C, ambient temperature storage: –25 °C ... +70 °C
- Accessory family: Fieldbus modules
- Description: PROFINET coupler for WLL180T, KTL180 and AOD1. Features: PROFINET IRT, transmission rates 10 Mbaud – 100 Mbaud, M12 PROFINET connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
- Accessory family: Interface modules
- Description: Enables access to the device data of IO-Link sensors originating from third-party tools, compatible with FieldEcho®
- Accessory family: Connection modules
- Description: Optimized motor feedback splitter box: facility for connecting two encoders/motor feedback systems. Connection to Motion Control Modules FX3-MOC: female connector, D-Sub HD, 15-pin.
- Accessory family: Connection modules
- Description: Dual encoder connection box: facility for connecting two encoders. Connection to Motion Control Modules FX3-MOC: female connector, D-Sub HD, 15-pin.
- Accessory family: Fieldbus modules
- Description: Features: Profibus DP-V1 slave, transmission rate of 9.6 kbit/s – 12 Mbit/s, D-Sub connection (RS485), 9-pin, Profibus, M8 connection, 4-pin, access to all parameters of the connected sensors possible. See operating instructions for additional information and technical details
- Accessory family: Fieldbus modules
- Description: PROFINET coupler for WLL180T and AOD1. Properties: PROFINET IRT, transmission rates of 10 MBaud - 100 MBaud, M12 connection, M8 voltage supply connection, 4-pin, only output of switching output Q1 of the connected sensors. See operating instructions for additional information and technical details
- Accessory family: Connection modules
- Description: Compact connection module for wiring the voltage supply, I/Os, serial data interface and encoder. Intended for use with Bulkscan® LMS511. The mounting bracket with part no. 2059271 is required to connect the sensor.
- Accessory family: Connection modules
- Description: Ranger E/D connection terminal, screw connectors for fast I/O and encoder connection, DSUB for camera connection and plug for 24 V power supply
- Accessory family: Interface modules
- Description: Meeting Point Router MPR-4G with 2 x Ethernet interfaces, operation via LC display. Antenna and mobile router (certified for the respective country, for EU-27 e.g. EBW L-100, art. no.: 6059433) must be purchased separately.
- Accessory family: Evaluation units
- Description: OD Mini evaluation unit, OD5000 and OL1, master, 3 x Q, 1 x analog, open end cable, 2 m
- Accessory family: Cloning module
- Description: IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A)
- Accessory family: Connection modules
- Description: Single port PCI board for connection to Gigabit Ethernet high-end camera
- Accessory family: Connection modules
- Description: I/O extension module to extend the number of digital inputs in combination with I/O extension box. Number of digital inputs: 2, only to use with 6037654
- Accessory family: Connection modules
- Description: BAM100 analog module for Bulkscan, by Beckhoff, 24 V DC supply voltage (-15% / + 20%), rail mounting on 35 mm C rail, according to EN 50022 with interlocking, Ethernet TCP/IP interface (RJ45), CoLa communication, 3 x IN: 4 mA ... 20 mA, 4 x OUT: 4 mA ... 20 mA
- Accessory family: Fieldbus modules
- Description: External CAN expansion module for up to 8 additional digital outputs, IP 20
- Accessory family: Evaluation units
- Description: OD Mini evaluation unit, master, 2 x Q, 2 x analog, 1 x IN, open end cable, 2 m
- Accessory family: Connection modules
- Description: Relay connection box for wiring voltage supply and I/Os as well as four volt-free outputs, with cover contact.