Adaptor
The right connection
118 results:
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 6-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 12-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 4-pin
- Number of slots: 8
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 18-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 4-pin
- Number of slots: 10
- Slot connection type: M8 4-pin A-coded female connector
- Cable: 5 m, 22-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 8
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 10-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 10
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: 3-pin
- Number of slots: 6
- Slot connection type: M8 3-pin A-coded female connector
- Cable: 5 m, 8-wire, PUR, halogen-free
- Description: Unshielded
- Application: Drag chain operation
- Connection type head A: 3-pin
- Number of slots: 4
- Slot connection type: M8 3-pin A-coded female connector
- Description: Unshielded
- Connection type head A: Female connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 8-pin, A-coded
- Connection type head C: Male connector M12 8-pin A-coded
- Note: Male connector M12, 8-pin, to 1 x female connector M12, 8-pin, to 1 x female connector M12, 5-pin, for connecting of a PLC
- Accessory family: Other adapters
- Number of slots: 1
- Connection type head A: Male connector, D-Sub-HD, 15-pin, straight
- Connection type head B: Female connector, D-Sub-HD, 15-pin, straight
- Description: The adapter adapts the CLV61x to the electrical connection diagram previously used for the CLV41x.
- Accessory family: Other adapters
- Description: The pushbutton combined with the M12 5-pin T-connector makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off and serves as a T-connector for simultaneous connection to the sender and receiver, splits the cable coming from the control cabinet between the sender and receiver.
- Accessory family: Other adapters
- Description: Connector for connecting an IO-Link master and up to 2 muting sensors to a safety light curtain or a multiple light beam safety device
- Connection type head A: Female connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 5-pin, A-coded
- Connection type head C: Male connector M12 5-pin A-coded
- Note: Male connector M12, 5-pin, straight, A-coded to 2 x female connector M12, 5-pin, straight, A-coded
- Accessory family: Other adapters
- Note: Terminal with 182 Ohm resistance, for pin 9 and 10 on the system connection, to improve the EMC behaviour if the EFI interface is not used
- Connection type head A: Male connector, M12, 4-pin, straight, B-coded
- Signal type: PROFIBUS DP
- Description: PROFIBUS DP, terminal resistor
- Connection type head A: Female connector, M12, 8-pin, A-coded
- Connection type head B: Female connector, M12, 8-pin, A-coded
- Connection type head C: Male connector M12 8-pin A-coded
- Note: Male connector M12, 8-pin, straight, to 1 x female connector M12, 8-pin, straight and 1 x female connector M12, 8-pin, straight
- Accessory family: Other adapters
- Cable material: PVC
- Connecting cable: 1 m, for details see dimensional drawings, PVC
- Connection type head A: Male connector, Micro D-Sub, 15-pin, angled
- Connection type head B: 2 x female connector, M12, 8-pin, straight
- Description: For connecting the Motion Control Module FX3-MOC with two HTL, TTL, or sin/cos encoders
- Accessory family: Other adapters
- Description: The M12 8-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.
- Accessory family: Other adapters
- Description: The M12 5-pin pushbutton makes it possible to switch the laser alignment aid integrated in the deTec4 sender on and off.
- Connection type head A: Female connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 8-pin, A-coded
- Connection type head C: Male connector M12 5-pin A-coded
- Note: Male connector M12, 5-pin, to 1 x female connector M12, 8-pin, to 1 x female connector M12, 5-pin, for connecting on IO-Link-Master
- Connection type head A: Male connector, M12, 5-pin, A-coded
- Connection type head B: Female connector, M12, 5-pin, A-coded
- Connection type head C: Female connector M12 5-pin A-coded
- Description: Male insert rotated by 90°