Contact
Feedback

Protection of palletizer stations

The microScan3 or S3000 safety laser scanners use two simultaneous protective fields to enable simultaneous and independent monitoring of two hazardous areas. When entering a hazardous area, only the relevant palletizer robot is stopped. The other robot continues to work. All safety components connect to a safety controller, such as a Flexi Soft, which deactivates the relevant robots in the event of a hazard.

  • Following product families can be used
    Product family Flexi Soft
    The software-programmable safety controller
    • Safety controller with modular hardware platform
    • Configuration saved in the system plug
    • Safe controller networking with Flexi Line
    • Safe series connection with Flexi Loop
    • Safe drive monitoring
    • Safe analog value monitoring
    • Flexi Soft Designer license-free configuration software
    Always available – safety technology in your network
    • Direct integration in PROFINET IO safe bus system
    • 4 m, 5.5 m or 7 m protective field range
    • 4 switchable field sets
    • Managed 2-Port switch for copper or optical fiber based conductors
    • Configuration memory integrated in the system plug
    • Remote diagnostics and configuration through safety controller
    • Simultaneous monitoring of 2 protective fields
  • Following products can be used
    1075843
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O
    • System part: Sensor including system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    • Details
    • Compare now
    1089492
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    • Details
    • Compare now
    1075842
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    • Details
    • Compare now
    1067875
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O
    • System part: Replacement sensor without system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1075843
    • Details
    • Compare now
    1067360
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O
    • System part: Replacement sensor without system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1075842
    • Details
    • Compare now
    1083078
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O AIDA
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 4
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    Please note: Connectivity for this variant is not available from SICK.
    • Details
    • Compare now
    1089493
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core I/O AIDA
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 4
    • Integration in the control system: Local inputs and outputs (I/O)
    • Connection type: M12
    Please note: Connectivity for this variant is not available from SICK.
    • Details
    • Compare now
    1094457
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1082016
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Sensor including system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1082015
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1075845
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Replacement sensor without system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1082015
    • Details
    • Compare now
    1094456
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Replacement sensor without system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1094457
    • Details
    • Compare now
    1075848
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – EtherNet/IP™
    • System part: Replacement sensor without system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: CIP Safety™ over EtherNet/IP™
    • Connection type: M12
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1082016
    • Details
    • Compare now
    1100404
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1100406
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1100408
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1083010
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: RJ45 push-pull (copper)
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1083012
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: RJ45 push-pull (copper)
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1094459
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: RJ45 push-pull (copper)
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1083009
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Replacement sensor without system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: RJ45 push-pull (copper)
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1083010
    • Details
    • Compare now
    1083011
    microScan3
    Safety laser scanners
    • Variant: microScan3 Core – PROFINET
    • System part: Replacement sensor without system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: PROFINET PROFIsafe
    • Connection type: RJ45 push-pull (copper)
    Please note: Replacement sensor without system plug; only functional in combination with system plug;
    replacement sensor for 1083012
    • Details
    • Compare now
    1092538
    Safe EFI-pro System
    Safety systems
    • Variant: microScan3 Core – EFI-pro
    • System part: Sensor including system plug
    • Protective field range: 5.5 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: EFI-pro
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1092539
    Safe EFI-pro System
    Safety systems
    • Variant: microScan3 Core – EFI-pro
    • System part: Sensor including system plug
    • Protective field range: 4 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: EFI-pro
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
    1094455
    Safe EFI-pro System
    Safety systems
    • Variant: microScan3 Core – EFI-pro
    • System part: Sensor including system plug
    • Protective field range: 9 m
    • Scanning angle: 275°
    • Number of fields: 8
    • Integration in the control system: EFI-pro
    • Connection type: M12
    Please note: The system plug is pre-assembled on the underside. It can either be mounted on the rear side or the underside.
    • Details
    • Compare now
Sensor solutions for robotics
Robotics image
Sensor solutions for robotics
Robotics image

Working together as equals

Thanks to sensors from SICK, robots perceive more precisely. For all challenges in the field of robotics: Robot Vision, Safe Robotics, End-of-Arm Tooling, and Position Feedback.
Find out more

TOP