Contact
Feedback

Linear encoders
MAX48

Integrated cylinder position measurement for mobile machines

  • At a glance
    • Measuring range: 50 to 2,500 mm (1 mm steps), typical resolution 0.1 mm
    • Analog, CANopen, SAE J1939 and PWM interfaces are available
    • Pressure-resistant housing, designed for hydraulic operating pressure of up to 400 bar
    • High operating temperature (electronics) up to +105 °C
    • Fluid temperature (hydraulic oil) up to max. +95 °C
    • Compact dimensions: 10 mm installation space, 30 mm damping zone
    • Position magnet does not need a spacer disk
    Your Benefits
    • Magnetostriction: Reliable, safe and wear-free
    • 100% mechanical and electrically compatible with existing cylinder constructions
    • Space-saving installation: Better utilization of the piston stroke in tight installation space of the cylinder
    • Extremely stable signal behavior and very good EMC properties: Resistant to extreme electrical influences, such as radiated or coupled faults in the on-board power supply
    • Status monitoring: Monitoring of piston strokes, operating hours and max. oil temperature provides a statement about the cost-optimized operation of the machine
    • Favorable cost-benefit ratio
    MAX48
    Integrated cylinder position measurement for mobile machines

    The MAX48 linear encoder enables non-contact, completely integrated and absolute position measurement in hydraulic cylinders. Suitable for use under extreme ambient and operating conditions in applications in mobile machines. The innovative technology of magnetostriction offers high reliability, expanded diagnostic functions and well as a considerable reduction in operating costs. The 48 mm housing can be easily installed in the existing cylinder construction. All in all, linear encoders from SICK impress with their attractive cost-benefit ratio.

    • Technical data overview
      Measuring range100 mm ... 2,500 mm
      ResolutionTyp. 0,1 mm (rauschfrei)
      Electrical interfaceAnalog / Digital,
      Analog, CANopen, SAE J1939
      Connection type

      Male connector, M12, 4-pin

      Cable, M12, 4-pin, 3-wire

      Cable, 3-wire

      Male connector, M12, 5-pin

      Enclosure ratingEN 60529 IP67
Please select your products
Show all Hide all
Filter by:

29 results:

Result 1 - 24 out of 29

1219818
MAX48
Linear encoders
  • Measuring range: 250 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 80 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219784
MAX48
Linear encoders
  • Measuring range: 300 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin, 80 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Details
  • Compare now
1221168
MAX48
Linear encoders
  • Measuring range: 500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin, 100 mm
  • Communication interface: SAE J1939
  • PIN and wire allocation: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Details
  • Compare now
MAX48
Linear encoders
  • Measuring range: 500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 5-pin, 60 mm
  • Communication interface: CANopen
  • PIN and wire allocation: 1=n.c., 2=VDC, 3=GND, 4=CAN_H, 5=CAN_L
  • Details
  • Compare now
1219816
MAX48
Linear encoders
  • Measuring range: 1,000 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=SIG, 3=GND, 4=n.c.
  • Details
  • Compare now
1219865
MAX48
Linear encoders
  • Measuring range: 400 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin, 80 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Details
  • Compare now
1219867
MAX48
Linear encoders
  • Measuring range: 200 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin, 80 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=n.c., 2=VDC, 3=GND, 4=SIG
  • Details
  • Compare now
1219795
MAX48
Linear encoders
  • Measuring range: 100 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 80 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219798
MAX48
Linear encoders
  • Measuring range: 1,000 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219747
MAX48
Linear encoders
  • Measuring range: 2,500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Details
  • Compare now
1219767
MAX48
Linear encoders
  • Measuring range: 500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 63 mm
  • Connection type: Male connector, M12, 4-pin, 120 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219732
MAX48
Linear encoders
  • Measuring range: 600 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Details
  • Compare now
1219730
MAX48
Linear encoders
  • Measuring range: 500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Details
  • Compare now
1219739
MAX48
Linear encoders
  • Measuring range: 1,100 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Details
  • Compare now
1219729
MAX48
Linear encoders
  • Measuring range: 300 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=SIG, 3=GND, 4=n.c.
  • Power output: 4 mA ... 20 mA
  • Details
  • Compare now
1219745
MAX48
Linear encoders
  • Measuring range: 2,500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219741
MAX48
Linear encoders
  • Measuring range: 1,100 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219744
MAX48
Linear encoders
  • Measuring range: 2,500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 1,000 mm
  • Communication interface: Analog
  • Power output: 4 mA ... 20 mA
  • Details
  • Compare now
1219728
MAX48
Linear encoders
  • Measuring range: 300 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now
1219740
MAX48
Linear encoders
  • Measuring range: 1,100 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 1,000 mm
  • Communication interface: Analog
  • Power output: 4 mA ... 20 mA
  • Details
  • Compare now
1219733
MAX48
Linear encoders
  • Measuring range: 600 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 1,000 mm
  • Communication interface: Analog
  • Power output: 4 mA ... 20 mA
  • Details
  • Compare now
1219727
MAX48
Linear encoders
  • Measuring range: 300 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 1,000 mm
  • Communication interface: Analog
  • Power output: 4 mA ... 20 mA
  • Details
  • Compare now
1219743
MAX48
Linear encoders
  • Measuring range: 2,500 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Cable, 3-wire, 300 mm
  • Communication interface: Analog
  • Details
  • Compare now
1219734
MAX48
Linear encoders
  • Measuring range: 600 mm
  • Diameter of the pressure pipe: 10 mm
  • Damping: 30 mm
  • Connection type: Male connector, M12, 4-pin, 100 mm
  • Communication interface: Analog
  • PIN and wire allocation: 1=VDC, 2=n.c., 3=GND, 4=SIG
  • Details
  • Compare now

Result 1 - 24 out of 29

TOP