Contact
Feedback

CEMS solutions
MCS100FT-C

The all-purpose champion of meeting environmental emissions monitoring needs

Your Benefits

  • Measures up to 13 gas components
  • Long maintenance interval of 6 months for many measuring components
  • Measures greenhouse gases such as N2O, CH4, and CO2
  • Measures low concentrations of HF: 0 ... 3 mg/m³

Overview

The all-purpose champion of meeting environmental emissions monitoring needs

The MCS100FT-C system uses Fourier infrared technology to monitor flue gas. From probe sampling to cell, all components that come in contact with the sample gas are heated to a temperature above the acid dew point to prevent corrosion. The sampling probe uses two-stage filtration, and the inlet to the analysis cell is also filtered, ensuring safe use of the system. A built-in ejector transports the sample gas without the wear that moving parts would cause, and a built-in pressure module keeps the sample gas in the cell stable. The analyzer can be used for environmental emissions monitoring and also for industrial process monitoring. An optional FID may be added to measure VOCs.

At a glance
  • Touch-screen operation with multiple levels of password protection
  • Ethernet interface for remote diagnostics and operation
  • Gas paths completely heated to prevent corrosion and measurement error produced by condensation
  • Built-in ejector reduces component wear
  • Optional zirconium dioxide sensor for O2 measurement
  • Utilizes Fourier infrared technology for rapid measurement of multiple gas components
  • Supports calibration of the full system or direct calibration of the analyzer
  • Multi-stage filtration allows safe sampling
  • Automatic zeroing, span calibration, and regular back-purging
  • Includes temperature and flow control and automatic sampling cut-off if malfunction occurs
  • Automatic purging protects the instrument in case of malfunction
  • The interferometer can be unaffected by vibrations

Applications

Service & Support

Technical overview

 

Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

  • MCS100FT-C system

    MCS100FT-C system

    Measured valuesCH4, C2H6, C3H8, Corg, CO, CO2, HCl, HF, H2O, NH3, NO, NO2, N2O, O2, SO2, gas velocity, temperature, pressure, dust concentration
    Performance-tested measurandsCO, CO2, HCl, H2O, NO, NO2, O2, SO2, gas velocity, temperature, pressure, dust concentration
    Measurement principlesFTIR spectroscopy
    Length of measuring path
    8.48 m
    Sample quantity
    ≤ 300 l/h
    Measuring ranges
    CH40 ... 50 mg/m³ / 0 ... 150 mg/m³
    C3H80 ... 55 mg/m³
    Corg0 ... 15 mg/m³ / 0 ... 500 mg/m³
    CO0 ... 75 mg/m³ / 0 ... 1,500 mg/m³
    CO20 ... 25 Vol.-%
    HCl0 ... 15 mg/m³ / 0 ... 150 mg/m³
    H2O0 ... 40 Vol.-%
    NH30 ... 10 mg/m³ / 0 ... 50 mg/m³
    NO0 ... 200 mg/m³ / 0 ... 2,000 mg/m³
    NO20 ... 100 mg/m³ / 0 ... 500 mg/m³
    N2O0 ... 50 mg/m³ / 0 ... 500 mg/m³
    O20 ... 21 Vol.-%
    SO20 ... 75 mg/m³ / 0 ... 1,500 mg/m³
    Certified measuring ranges
    H2O0 ... 40 Vol.-%
    NO0 ... 500 mg/m³
    O20 ... 25 Vol.-%
    SO20 ... 600 mg/m³
    Dust concentration0 ... 100 mg/m³
    Gas velocity0 ... 40 m/s
    Response time (t90)
    ≤ 200 s
    Accuracy
    ≤ 2 %
    Of measuring range full scale
    Sensitivity drift
    < 3 %: of the measuring range full scale value per maintenance interval
    Zero point drift
    < 0.5 %: of the measuring range full scale value per maintenance interval
    Reference point drift
    ≤ ± 2 %: of the measuring range full scale value per month
    Detection limit
    < 2 %: of measuring range full scale
    Process temperature
    ≤ +1,300 °C
    Sample gas temperature
    ≤ +220 °C
    Process pressure
    900 hPa ... 1,100 hPa
    Process gas humidity
    Non-condensing
    Ambient temperature
    +5 °C ... +35 °C
    Storage temperature
    –20 °C ... +60 °C
    Ambient pressure
    900 hPa ... 1,100 hPa
    Ambient humidity
    ≤ 80 %
    Relative humidity; non-condensing
    ConformitiesHJ/T 76-2007
    Enclosure rating
    IP65
    Analog outputs4 outputs:
    0/4 ... 20 mA, 500 Ω
    Analog inputs4 inputs:
    0/4 ... 20 mA
    Digital outputs64 outputs:
    48 V AC, 0.5 A, 35 W / 48 V DC, 0.5 A, 24 W
    Digital inputs64 inputs:
    3.9 V, 4.5 mA, 0.55 W
    Additional inputsFor temperature, pressure, gas velocity, and dust concentration
    Indication
    LC display
    InputTouchscreen
    OperationMenu-driven operation via control unit
    Menu languagesEnglish
    ModelIndoor analyzer cabinet
    Dimensions (W x H x D)
    800 mm x 2,200 mm x 800 mm
    Weight
    ≤ 300 kg
    Material in contact with mediaPTFE, CaF2
    Power supply
    Voltage220 V AC
    Frequency50 Hz
    Current consumptionDepending on type and length of sample gas line
    Power consumptionAnalyzer: ≤ 1,000 W
    Sampling probe: ≤ 450 W
    Auxiliaries
    Sample gas connections
    Swagelok 8 mm
    Auxiliary gas connections
    DN 6/8
    Corrective functionsManual or automated adjustment with test gases
    Test functionsInternal zero and reference point check
    System components

    Analyzer

    Sampling probe

    Sample gas line

    Control unit

    Integrated componentsEjector pump
    OptionsZirconium dioxide sensor (oxygen measurement)
All technical data can be found accompanying the individual product

Downloads

TOP