Automation light grids

SLG-2

Simple machine integration thanks to compact design

In modern machine designs, space is usually quite limited. In many places, every millimeter counts and it is important that dimensions are very compact. These are just the right application conditions for the SLG-2 light grid – the powerful solution for classic detection and measuring tasks. The SLG-2 is available in slim and flat variants, which means it can be integrated very well into various tight installation spaces, offering you a high level of flexibility for machine integration.

product selection

Light grid systems

The flexible and efficient detection system in one chain

FlexChain offers you a flexibly expandable light grid – with up to 60 cascading sensors. Whether it be a photoelectric proximity sensor, through-beam photoelectric sensor or photoelectric retro-reflective sensor: different sensor technologies can be combined and freely arranged. The sequential cycling provides maximum measurement certainty, while diagnostic functions ensure stable processes.

product selection

MLG-2

For stringent requirements

Measurement light grids are ideal for complex applications because the beams are evaluated individually and detailed measurement data forwarded to a PLC. Being modular in design, different detection heights and beam separations can be selected. Application: on conveyor belts, automated storage and retrieval systems or for order processing.

product selection

Safety light curtains

Safety and automation combined

Safety light curtains provide your systems with reliable productivity as well as a high degree of flexibility and automation Take advantage of our many powerful products for a wide range of applications — up to the highest level of safety To make sure your processes run smoothly

product selection

Web edge measurement

Maximum precision when determining web widths

The tried-and-proven light grid technology combined with state-of-the-art software in the MLG-2 ensure maximum accuracy and a reliable data basis for web width measurement. Even particularly fast moving or transparent objects can be reliably detected thanks to the diverse functionality provided.

product selection

Automation light grids

The comprehensive portfolio for two-dimensional monitoring

Whether large or small, fast or slow, shiny, transparent or dark – SICK offers a broad portfolio of high-performance light grids for the reliable detection and measurement of objects, persons, and vehicles and for presence and protrusion monitoring. With numerous designs and performance variants to choose from, our light grids offer the ideal solution for a wide variety of applications.

Sensor principle

Task

Ambient conditions

Object properties

Special applications

Housing

Communication interface

Search area

Products Product families

Filter by:

Operating range

Beam separation

Detection height

Response time

Connection type

Switching output

13 results:

Result 1 - 8 out of 13

MLG-2

Beam separation: 2.5 mm, 5 mm, 10 mm, 20 mm, 25 mm, 30 mm, 50 mm
Maximum range: 12 m
Functions: Cross beam measurement, 4 x zone measurement, high-speed scan, transparent mode
Interfaces: PNP, analog, RS485, IO-Link, PROFINET, PROFIBUS, EtherCAT®, EtherNet/IPTM, CANopen
Sun resistance mode with reliable switching threshold

Compare Compare now

Select

deTec

NFC diagnosis and smartphone app
Diagnostics and automation via IO-Link
Object pattern recognition using Smart Box Detection
2-signal muting
Smart presence detection
Configuration of all functions without software
Reduced resolution: 1 or 2 beams
Different enclosure ratings as well as variants for use in explosion-hazardous areas

Compare Compare now

Select

SLG-2

Housing dimensions: 12 mm x 24 mm, detection heights: 100 mm to 2,400 mm
Slim and flat housing variants
Cross-beam function: Up to 9 beams
Short response times due to its own light grid ASIC
Detection, classification and measurement functions as well as Smart Tasks
Detailed diagnostic information
IO-Link COM3 interface

Compare Compare now

Select

MLG-2 WebChecker

Measurement accuracy: ± 0.3 mm
Resolution: 0.1 mm
Measuring field: 3,150 mm (in 150 mm steps)
Response time: 32 μs (from beam to beam)
Interfaces: 3 switching outputs, analog interface, IO-Link, RS-485, PROFINET, EtherCAT® and EtherNet/IP™
Operating range: 2,500 mm
Interface output: 10 edges with 5 edges and 5 center positions

Compare Compare now

Select

FlexChain

Ultra-simple wiring for up to 60 sensors
Sequential cycling prevents mutual interference
Free arrangement of various sensor technologies
Sensors available in different lengths of cable
Sensor data evaluation in the system or direct transmission of raw data
Process stability thanks to diagnostic function

Compare Compare now

Select

miniTwin

Twin sticks: sender and receiver in a compact housing
Different protective field heights, graduated to 60 mm each
Diagnostics through protective field visualization
Commissioning and alignment by means of color LEDs, configuration without software
Cascading possible
Application-specific brackets

Compare Compare now

Select

WLG

0.6 ms response time
Eight visible transmitter LEDs
Up to eight PNP switching outputs and one alarm output
Sensitivity can be set via a potentiometer
Polarizing filter for reflective surfaces

Compare Compare now

Select

HLG

2 mm resolution
Response time 3 ms
Detection height 50 mm
Cable synchronization
PNP or NPN with Q or Qnot outputs (NO/NC)
1 x test, 1 x teach-in input
M12 male connector, 8-pin

Compare Compare now

Select

Result 1 - 8 out of 13

Advantages

Strong in performance, versatile in use

Whether transparent, film-wrapped, dark, bulky or with a repeated pattern: the automation light grids from SICK identify objects uniquely and reliably. Our portfolio can handle not only simple switching tasks but also complex volume calculations with maximum precision and reliability. The sensors use state-of-the-art sensor technology for top performance. They are also intuitive to use and are easily integrated into existing systems.

**High resolution** Even the smallest objects can be reliably detected using light grids. The higher the resolution, the finer the detection. The HLG and the MLG-2 can even detect objects of just 2 mm or 2.5 mm in size. The accuracy also depends on the specific speed and the configured response time.

**Short response times** The light grids from SICK will impress you with their extremely quick response times. This enables them to detect and accurately pinpoint at lightning fast speeds even small objects moving at high speeds. With response times and minimum dwell times of < 1 ms, the sensors from SICK have been specially designed for high speed manufacturing processes.

**Predefined operating modes** To ensure a reliable object detection even for the most demanding applications, the light grids come with a number of different pre-defined operating modes. This enables the sensors to be commissioned quickly and easily. Detection and measurement are especially reliable even for transparent objects or at high processing speeds.

**Modular design** The MLG and SLG product families are modularly designed and can be tailored to meet the particular requirements on-site. Detection height, beam separation and sensing range – you can tailor the automation light grids to your specific application and installation scenario.

ambient conditions

At home in any environment

Whether indoors or outdoors: our automation light grids are rugged, immune to ambient light, and can be operated at temperatures between –30 °C and +55 °C. The numerous designs available cover a wide range of applications. For example, our smart light grids, which are only 8 mm deep and 25 mm wide, can be integrated almost anywhere – whether it be in doors, conveyor belts, machines or shelves. The VLC100 flexibly adjusts the reading field between 40x40 cm and 200x200 cm. And, thanks to its IP 65/67 enclosure rating, the MLG-2 is ideal for the most demanding outdoor applications.

software

Intuitive configuration tool SOPAS

You can intuitively tailor your automation light grids to your requirements using the SOPAS configuration tool. A variety of parameters and functions can be easily configured in this clearly structured application without the need for specialist knowledge on the functioning of the device. The interface visually displays the beams and received energy, and allows telegrams to be quickly created. SOPAS therefore enables specific sensor settings to be implemented in next to no time.

Communication interface

Wide variety of interfaces

Thanks to the integrated interfaces, no additional hardware is required. The measuring automation light grids, for example, communicate with your system via IO-Link. That means better data transmission performance, cloning functions, and the ability to monitor the device state. The MLG-2 ProNet provides additional interfaces such as EtherCAT, ProfiNet, EtherNet IP, CANopen and PROFIBUS. The switching automation light grids are equipped with relays and output signal switching devices.