Verification and Optimization
Electrical equipment check

Your Benefits

  • Early detection of hazards caused by electric shock to prevent injuries
  • Compliance with applicable safety standards increases machine safety
  • Safety is determined and corresponding documentation is provided in the inspection report for the machine documentation, which ensures all procedures and regulations are properly applied
  • Guaranteed measurement quality using calibrated measuring instruments
  • Measurement are obtained without interfering with the existing wiring
  • High testing quality through certification and periodic inspections in accordance with IEC 17020 is carried out by independent bodies and with on-going competency management


Maintenance and mounting work pose a risk of electric shock. Even during normal machine or system operation, the safety of the user must not be put at risk by the electrical equipment. SICK experts check whether the necessary protective measures have been implemented appropriately. Without interfering with the existing wiring, the experts obtain measurements with calibrated measuring instruments.

At a glance
  • Determination of the correct function of the protective bonding circuit as per the requirements of IEC 60204-1
  • Determination of the contact resistances and leakage currents
  • Production of a test record, which also describes any defects
  • Production of an inspection report


Safety Services from SICK: Safe consultancy, engineering and turnkey solutions