Contact
Feedback

miniTwin4

The smallest light curtain with the highest protection level, PL e
  • At a glance
    • Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
    • Compact cross section (15 mm x 32 mm) with no dead zones
    • Cascadable twin stick design – sender and receiver in a single housing
    • Customized protective field heights in 60-mm increments from 120 mm to 1,200 mm
    • Typical scanning ranges 0 m ... 5 m
    • Intelligent, software-free configuration of external device monitoring (EDM) and reset function (RES)
    • M12, 5-pin device connection
    Your Benefits
    • Cost-effective machine integration: the miniature design, cascading, and fine stepping of the protective field lengths enable flexible adaptation to the machine design
    • Standardization saves time and resources by making logistics, order processing, and service more straightforward
    • Exemplary handling: software-free, almost fully automatic commissioning and intuitive operation with sustainable optics
    • LED-guided start-up together with colored LEDs for quick alignment and unequivocal protective field visualization ensure rapid diagnostics
    • A continuous protective field for cascade applications eliminates blind zones, reduces the safety distance, and thereby increases productivity
    • Application-specific brackets increase mounting flexibility, while reducing the mounting time
    miniTwin4
    The smallest light curtain with the highest protection level, PL e

    The miniTwin4 safety light curtain is the smallest electro-sensitive protective device of its kind. It is mainly used at hazardous points for finger and hand protection. The miniTwin, which is based on a twin stick design, combines the technologies of both sender and receiver into one compact housing unit. Whether it is used as a stand-alone device or it is cascaded with other miniTwin light curtains, the miniTwin4 enables machine access protection up to the highest safety level, PL e. Protective field heights, in 60-mm increments, from 120 mm to 1,200 mm are available and it is possible to cascade up to three systems. Commissioning, which is almost completely automatic, requires no software. This along with the bracket sets saves valuable installation time. The miniTwin4 offers a modern, industrial design that combines an intuitive operating system with sustainable optics.

    • Technical data overview
      Scanning range0 m ... 4 m
      Protective field height120 mm ... 1,200 mm
      Resolution14 mm / 24 mm / 34 mm
      TypeType 4 (IEC 61496)
      Safety integrity level

      SIL3 (IEC 61508)

      SILCL3 (EN 62061)

      Enclosure ratingIP 65 (EN 60529)
      Ambient operating temperature–20 °C ... +55 °C
Please select your products
Show all Hide all
Filter by:

171 results:

Result 1 - 24 out of 171

1206951
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device
  • Mounting system type: O-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 120mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1206954
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device
  • Mounting system type: O-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 240mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207094
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 120mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207097
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 180mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207098
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 240mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207099
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 300mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207100
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 360mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207101
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 420mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207102
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 480mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207103
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 540mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207104
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 600mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207106
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 720mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207107
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 780mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207109
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 900mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207111
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 1020mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207114
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 1200mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207233
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 24mm
  • Protective field height: 720mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207250
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 34mm
  • Protective field height: 600mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207260
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a standalone device or cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 34mm
  • Protective field height: 1200mm
  • System connection: Male connector M12, 5-pin
  • Details
  • Compare now
1207116
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a cascaded host or guest device – not as a cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 180mm
  • System connection: Male connector M12, 5-pin
  • Extension connection: Female connector M12, 5-pin
  • Details
  • Compare now
1207117
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a cascaded host or guest device – not as a cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 240mm
  • System connection: Male connector M12, 5-pin
  • Extension connection: Female connector M12, 5-pin
  • Details
  • Compare now
1207118
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a cascaded host or guest device – not as a cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 300mm
  • System connection: Male connector M12, 5-pin
  • Extension connection: Female connector M12, 5-pin
  • Details
  • Compare now
1207119
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a cascaded host or guest device – not as a cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 360mm
  • System connection: Male connector M12, 5-pin
  • Extension connection: Female connector M12, 5-pin
  • Details
  • Compare now
1207133
miniTwin4
Safety light curtains
  • Usage: miniTwin4 as a cascaded host or guest device – not as a cascade end unit
  • Mounting system type: C-fix or L-fix bracket
  • Typical scanning range: 0 m ... 5 m
  • Resolution: 14mm
  • Protective field height: 1200mm
  • System connection: Male connector M12, 5-pin
  • Extension connection: Female connector M12, 5-pin
  • Details
  • Compare now

Result 1 - 24 out of 171

safetyPLUS® – competence in safe machinery

Guide, knowledge, regulations, FAQs, ...

Learn more
TOP