Contact
Feedback

Incremental encoders

Versatile, compact and flexible – Incremental encoders

Incremental encoders generate information about position, angle, and rotation counts. The resolution is defined in the number of lines or pulses per rotation, which the encoder transmits to the control unit for each rotation. The current position can be determined by the control unit by counting these pulses. A reference run can be necessary when switching on the machine.

10 results:

Result 1 - 10 out of 10

View: View Gallery View List
Product family DBS50 Core
The MultiFit Incremental Encoder
  • Connection with universal cable outlet
  • Face mount flange with 8 mm solid shaft
  • Face mount flange with 2 mounting hole patterns and servo groove
  • Compact housing diameter of 37 mm with compact construction depth, flange diameter 50 mm
  • Various electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
  • Number of lines from 10 to 2,500 possible
  • Temperature range: –20 °C... +85 °C
  • Enclosure rating: IP 65
Product family DBS36 Core
The MultiFit Incremental Encoder
  • Connection with universal cable outlet
  • Designs with blind hollow shaft or face mount flange with solid shaft
  • Face mount flange with 6 mounting hole patterns and servo groove
  • Hollow shaft with universal stator coupling
  • Compact housing diameter of 37 mm with compact construction depth,
  • Electrical interfaces: TTL/RS-422, HTL/push pull and Open Collector NPN
  • Number of lines: 10 to 2,500
  • Temperature range: –20 °C ... +85 °C
  • Enclosure rating: IP 65
Product family DFS60 Inox
High-resolution incremental encoder – durable and programmable
  • Housing, flange, and shaft made from stainless steel
  • Face mount flange, servo flange, or square flange with solid shaft and blind hollow shaft
  • IP 67 enclosure rating
  • Resolution up to 65,536 pulses
  • Radial cable outlet or M12 male connector
  • Electrical interfaces: TTL/RS-422, HTL/Push Pull, SinCos 1 Vpp
  • Can be programmed with the PGT-08-S and PGT-10-Pro as an option
Product family DKS40
Rugged, high-performance incremental encoder
  • Compact housing
  • Durable, low-cost design
  • Interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.
  • Connection via cable outlet, for radial or axial use with open ends or fitted with an M12 connector
  • Face mount flange with solid shaft
  • Housing for simple clamping ring mounting
  • Any line count possible from 1 to 2,048
Product family DBS60 Core
Rugged, versatile incremental encoder for industrial applications
  • Face mount flange, servo flange, blind and through hollow shaft
  • Housing unit: Ø58 mm, compact mounting depth, large bearing distance
  • Flange and stator couplings enable diverse mounting options
  • Resolution: up to 5,000 pulses
  • Cable outlet, radial M23 or M12 connector
  • TTL/RS-422 and HTL/push-pull, universal TTL/HTL interface with 4.5 V DC to 30 V DC
  • Hollow shafts: metal up to Ø5/8, insulated up to Ø15 mm, front and rear clamping
Product family DFS60
High-resolution, programmable encoder for sophisticated applications
  • Compact installation depth
  • High resolution up to 16 bits
  • Optionally programmable: Output voltage, zero pulse position, zero pulse width and number of pulses
  • Connection: Radial or axial cable outlet, M23 or M12 connector, axial or radial
  • Electrical interfaces: 5V & 24V TTL/RS-422, 24 V HTL/push pull
  • Mechanical interfaces: face mount or servo flange, blind or through hollow shaft
  • Remote zero set possible
Product family DUS60
Encoders with versatile configuration for machine axes applications
  • Solid shaft or hollow bore incremental encoder
  • DIP switches for configuring resolution, signal output,
  • And counting direction
  • Universal 4.5 V ... 30 V supply
  • LEDs that indicate encoder status and output signal
  • Rotatable M12 male connector, 4-pin or 8-pin, or universal cable outlet
  • Optional fault output directly from encoder
Product family DGS35
Large hollow shaft encoders for rough environmental conditions
  • Incremental encoder Ø 3.5
  • Electrical interface
  • 5V TTL / RS422
  • 8 … 24V TTL / RS422
  • 8 … 24V HTL / push pull
  • 8 … 24V Open Collector
  • Blind hollow shaft Ø 30 mm, 1", ½",5/8", ¾", 7/8"
  • Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
  • Number of lines 120 … 16,384
Product family DGS34
Large hollow shaft encoders for rough environmental conditions
  • Incremental encoder Ø 3.5
  • Electrical interface
  • 5V TTL / RS422
  • 8 … 24V TTL / RS422
  • 8 … 24V HTL / push pull
  • 8 … 24V Open Collector
  • Blind hollow shaft Ø 30 mm, 1", ½",5/8", ¾", 7/8"
  • Connection type cable 1 m, 1,5 m, 3 m, 5 m, 10 m
  • Number of lines 120 … 16,384
Product family DFS2x
Factory-configured and user-programmable incremental encoders
  • Compact 2-inch and 2.5-inch design
  • Integer resolutions from 1 to 65,536 pulses per rev
  • Compatible with PGT-08-S PC-based programming tool
  • Programmable encoders allow selection of resolution, signal phase, zero pulse position, and output interface
  • Flange, hollow shaft, and blind hollow shaft options
  • M12 connector, MS connector, and flying lead cable connection options

Result 1 - 10 out of 10

TOP