Contact
Feedback

MCS300P HW

Simultaneous process monitoring of up to 6 measuring components

  • At a glance
    • Simultaneous measurement of up to 6 components plus O2
    • Sample flow control and sample gas pressure measurement
    • Temperature of heated system components up to 220 °C
    • Automatic sample point switching for up to 8 sample points (option)
    • Automatic adjustment of zero and span point
    • Integrated adjustment unit without span gas (option)
    • Extended operation via PC and software
    • Flexible I/O modules
    Your Benefits
    • Economic, automatic adjustment without expensive test gases
    • Easy remote control by integration in existing networks
    • Automatic control of the complete measuring system and probe
    • Low maintenance and reliable due to hot measurement
    • In combination with probe SCP3000 also for measurements at high dust loads and high temperatures
    • Short response time due to high sample gas flow
    MCS300P HW
    Simultaneous process monitoring of up to 6 measuring components

    The MCS300P HW is a hot/extractive analyzer system for measurement of gases. It measures IR- or VIS-active components with variable measuring ranges for monitoring and controlling of combustion and flue gas conditioning. The heated system components prevent a temperature drop below the water and acid dewpoint. This results in lower maintenance and higher reliablity and long-time stablity of the system, also under rugged and demanding conditions. Automatic adjustment functions, easy operation concept and modern communication protocols results in a quick and easy integration into a local control system network.

  • Please note: The exact device specifications and performance data of the product may deviate from the information provided here, and depend on the application in which the product is being used and the relevant customer specifications.

    • System
      Measured valuesCO, CO2, HCl, H2O, NH3, NO, NO2, N2O, SO2, O2
      Measurement principlesInterference filter correlation, Gas filter correlation, Zirconium dioxide sensor
      Gas flow rate
      150 l/h ... 800 l/h
      Measuring ranges
      CO0 ... 800 ppm / 0 ... 5 Vol.-%
      CO20 ... 20 Vol.-% / 0 ... 100 Vol.-%
      HCl0 ... 700 ppm / 0 ... 12,000 ppm
      H2O0 ... 1 Vol.-% / 0 ... 60 Vol.-%
      NH30 ... 550 ppm / 0 ... 5,000 ppm
      NO0 ... 750 ppm / 0 ... 15,000 ppm
      NO20 ... 500 ppm / 0 ... 4,000 ppm
      N2O0 ... 500 ppm / 0 ... 7,500 ppm
      O20 ... 1 Vol.-% / 0 ... 21 Vol.-%
      SO20 ... 200 ppm / 0 ... 10 Vol.-%

      Other measuring ranges and components on request

      2 measuring ranges per component

      Response time (t90)
      ≤ 150 s
      Depending on type and length of sample gas line
      Zero point drift
      IR< 2 %: of measuring range full scale per week
      Detection limit
      ≤ 2 %: of measuring range full scale
      Process temperature
      ≤ +1,300 °C
      Depending on sampling probe
      Sample gas temperature
      ≤ +220 °C
      Process pressure
      800 hPa ... 1,200 hPa
      Ambient temperature
      +5 °C ... +35 °C
      Temperature change maximum ±10 °C/h
      With cooling device+5 °C ... +45 °C
      Temperature change ±10 °C/h maximum, other temperatures on request
      Ambient humidity
      ≤ 80 %
      Non-condensing
      Electrical safetyCE
      Enclosure rating
      IP43: versions with NOx-converter (option)
      Analog outputs2 outputs:
      0/4 ... 22 mA, 500 Ω
      Electrically isolated, additional outputs if using I/O modules (option)
      Analog inputs2 inputs:
      0/4 ... 22 mA, 100 Ω
      Electrically isolated, additional inputs if using I/O modules (option)
      Digital outputs

      3 potential-free contacts:
      Additional outputs if using I/O modules

      2 power relays:
      Electrically isolated, additional outputs if using I/O modules (option)

      Digital inputs2 potential-free contacts:
      Additional inputs if using I/O modules
      Modbus
      Type of fieldbus integrationTCP
      Ethernet
      FunctionConnection to SOPAS ET software or OPC server
      Indication
      LC display
      Status LEDs: "Power", "Maintenance" and "Failure"
      InputFunctional keys
      Operation

      Via operating unit in the analyzer

      Two operating levels, one password-protected

      Application specific programs for system control

      Via software SOPAS ET

      ModelSteel sheet cabinet
      Dimensions (W x H x D)
      800 mm x 2,100 mm x 600 mm
      Weight
      ≤ 300 kg
      Corrective functions

      Cross-sensitivity compensation of up to 6 interferents

      Internal adjustment unit (option)

      Test functionsAutomatic check cycle for zero and span point

    Technical drawings

    MCS300P HW system

1 results:

MCS300P HW
Process solutions
  • Details
  • Compare now
TOP