Single point, Window mode, Two point mode, Visual adjustment indicator
Switching frequency Qint.1 / Qint.2 on Pin2
250 Hz
Installation type
Non-flush
Connection type
Male connector M12, 4-pin 2)
Switching output
PNP
Output Q/C
Switching output or IO-Link mode
Output MFC
Switching output or input
Output function
NC / NO
Output characteristic
Programmable
Electrical wiring
DC 4-wire
Enclosure rating
IP68 3)
IP69K 4)
Special features
Smart Task, Resistant against coolant lubricants, IO-Link
Special applications
Zones with coolants and lubricants, Difficult application conditions
Special characteristic
Resistant against coolant lubricants
Pin 2 configuration
External input, Teach-in, switching signal
Items supplied
Mounting nut, V2A stainless steel, with locking teeth (2x)
1) Adjustable.
2) With gold plated contact pins.
3) According to EN 60529.
4) According to ISO 20653:2013-03.
Mechanics/electronics
Supply voltage
10 V DC ... 30 V DC 1)
Ripple
≤ 10 %
Voltage drop
≤ 2 V 2)
Hysteresis
Programmable 3)
Reproducibility
≤ 5 % 4)5)
Temperature drift (of Sr)
± 10 %
EMC
According to EN 60947-5-2
Continuous current Ia
≤ 200 mA 6)
Short-circuit protection
✔
Reverse polarity protection
✔
Power-up pulse protection
✔
Shock and vibration resistance
100 g / 2 ms / 500 cycles; 150 g / 1 Mio cycles; 10 Hz ... 55 Hz / 1 mm; 55 Hz ... 500 Hz / 60 g
Ambient operating temperature
–40 °C ... +75 °C
Housing material
Stainless steel V2A, DIN 1.4305 / AISI 303
Sensing face material
Plastic, LCP
Housing length
65 mm
Thread length
39 mm
Tightening torque, max.
Typ. 90 Nm 7)
UL File No.
E181493
Teach-in accuracy
+/- 3% of Sr
Resolution, typical (range)
40 μm (0 mm ... 8 mm)
75 μm (8 mm ... 10 mm)
150 μm (10 mm ... 12 mm)
Resolution, maximum (area)
75 μm (8 mm ... 10 mm)
150 μm (10 mm ... 12 mm)
300 μm (10 mm ... 12 mm)
1) IO-Link mode: 18 VDC ... 30 VDC.
2) At Ia max.
3) To comply with EN 60947-5-2, a hysteresis of approx. 10% must be set.
4) Ub and Ta constant.
5) Of Sr.
6) 200 mA total for both switching outputs.
7) Valid if toothed side of nut is used.
Safety-related parameters
MTTFD
688 years
DCavg
0 %
TM (mission time)
20 years
Communication interface
Communication interface
IO-Link V1.1
Communication Interface detail
COM2 (38,4 kBaud)
Cycle time
5 ms
Process data length
32 Bit
Process data structure
Bit 0 = switching signal QL1
Bit 1 = switching signal QL2
Bit 2 = switching signal QInt3
Bit 3 = switching signal QInt4
Bit 16 ... 31 = distance value
Factory setting
Switching Point 1: reference value 1
Output: normally open
Pin 2 configuration: input
Reference values
Note
Reference value in Digits for switching point in mm stored in the sensor
Reference value 1
12 mm
Reference value 2
10 mm
Reference value 3
8 mm
Reference value 4
5 mm
Reduction factors
Stainless steel (V2A, 304)
Approx. 0.7
Aluminum (Al)
Approx. 0.4
Copper (Cu)
Approx. 0.4
Brass (Br)
Approx. 0.4
Installation note
Remark
Associated graphic see "Installation"
A
18 mm
B
45 mm
C
18 mm
D
36 mm
E
12 mm
F
96 mm
Smart Task
Smart Task name
Base logics
Logic function
AND
OR
XOR
Hysteresis
Timer function
On delay
Off delay
ON and OFF delay
Impulse (one shot)
Inverter
Adjustable
Switching frequency
SIO Direct: 250 Hz 1)
SIO Logic: 250 Hz 2)
IOL: 250 Hz 3)
Switching signal
Switching signal QL1
Switching output
Switching signal QL2
Switching output
1) SIO Direct: sensor operation in standard I/O mode without IO-Link communication and without using internal sensor logic or time parameters (set to "direct"/"deactivated").
2) SIO Logic: Sensor operation in standard I/O mode without IO-Link communication. Sensor-internal logic or timing parameters plus Automation Functions used.
3) IOL: Sensor operation with full IO-Link communication and usage of logic, timing and Automation Function parameters.
