Measuring wheel encoders

Your Benefits

  • Complete system with universal mounting clamps and integrated cable guidance for quick and easy mounting
  • Spring steel mounting clamps for a high level of measurement accuracy when deflecting the measuring wheel in X and Y directions
  • Low-cost encoder of outstanding quality
  • Thanks to a high IP protection class, a non-corrosive mounting bracket, and a rugged encoder, the device is suitable for use in harsh ambient conditions.
  • Compact dimensions facilitate straightforward installation even where space is at a premium


The DKV60 compact measuring wheel encoder is a low-cost solution for determining position and speed directly on conveyor belts or rollers. The DKV60 consists of an incremental encoder, a measuring roller, an installation plate, and a cable guide. It is delivered fully pre-assembled. 2 different measuring wheel surfaces ensure the encoder can adapt to the surface to be measured.

At a glance
  • Complete, preassembled measuring system

  • Measuring wheel with knurl or O-ring for adaptation to the measuring surface

  • Mounting bracket made from anti-corrosive spring steel

  • High resolution up to 0.1 mm (1 … 2.000 pulses/revolution)

  • Electrical interfaces: Open collector NPN, TTL/RS-422 or HTL/push pull.

  • Connection via cable connection, for radial or axial use with open ends or fitted with an M12 connector


Technical overview

  • Technical data overview

    Technical data overview

    Resolution in pulses/mm0.015 ... 10
    Spring deflection spring arm± 1.5 mm
    Measuring wheel circumference200 mm
    Measuring wheel surfaceCross knurled aluminium / O ring EPDM
    Communication interfaceIncremental
    Communication Interface detailTTL / HTL
    Connection type

    Cable, 8-wire, universal

    Cable, 8-wire, with male connector, M12, 8-pin, universal

    Supply voltage4.5 V ... 30 V
All technical data can be found accompanying the individual product