Multiple light beam safety devices

Multiple light beam safety devices are electro-sensitive protective devices with two or more light beams. If one or more of the light beams is interrupted, a deactivation signal is sent to the machine so that any dangerous state on a machine or system can be stopped. A system consists of a sender and a receiver. In active/passive systems, the sender and receiver are located in a housing unit while a deflection unit on the passive side provides beam deflection.
17 results:
Ready for explosive atmospheres
- Pre-assembled and pre-wired multiple light beam safety device in an explosion-proof enclosure
- Certified for use in explosion-hazardous area in accordance with ATEX, IECEx and NEC thanks to explosion-proof enclosure
- Typical scanning range of up to 75.6 m
- Versions with 2, 3, and 4 light beams
- ATEX for gas: II 3G EX nA op is IIB T4 GC X
- ATEX for dust: II 3D Ex tc IIIB T135 °C Dc
- Innovative bracket
- LED alignment and output display
- Standardized connectivity: M12 male connector, 5-pin connection, compatible with Flexi Loop
- Enclosure ratings: IP65 and IP67
- ATEX for gas: II 3G Ex ec op is IIC T4 Gc
- ATEX for dust: II 3D Ex tc IIIC T135 °C Dc
- Innovative bracket
- LED alignment and status display
- Standardized connectivity: M12 male connector, 5-pin connection, compatible with Flexi Loop
- Enclosure ratings: IP65 and IP67
- Typical scanning range of up to 90 m
- 2 versions: small and wide scanning range
- Compact design
- The same housing as deTec
- Versions with 2, 3, and 4 light beams
- Ambient operating temperature of –30 °C to +55 °C
- Enclosure ratings IP65 and IP67
- Typical scanning range of up to 90 m
- 2 versions: small and wide scanning range
- Compact design
- The same housing as deTec
- Versions with 2, 3, and 4 light beams
- Ambient operating temperature of –30 °C to +55 °C
- Enclosure ratings IP65 and IP67
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849)
- The entire system satisfies enclosure rating IP69K
- Resistance certified in accordance with Ecolab and Diversey
- Easy-to-clean design without edges and gaps
- Protective housing designed to be replaceable
- Breathable membrane prevents protective housing from steaming up
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- The entire system satisfies enclosure rating IP69K
- Resistance certified in accordance with Ecolab and Diversey
- Easy-to-clean design without edges and gaps
- Protective housing designed to be replaceable
- Breathable membrane prevents protective housing from steaming up
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Robust housing with three mounting grooves
- Wide scanning range, up to 70 m
- External device monitoring (EDM), restart interlock, application diagnostic output, SDL interface
- Muting in combination with the UE403 muting switching amplifier
- 7-segment display
- Configuration and diagnostics via PC
- Optional integration features: laser alignment aid, LED
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Robust housing with three mounting grooves
- Wide scanning range, up to 70 m
- External device monitoring (EDM), restart interlock and application diagnostic output
- Standardized M12 connectivity
- 7-segment display
- Configuration keys located directly on the device
- Optional integration features: laser alignment aid, LED or AS-i interface
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849)
- Robust, industrial housing
- Scanning range up to 6 m
- External device monitoring (EDM) and internal self-testing configurable without PC
- Standardized M12 connectivity is available
- 7-segment display
- Unique A/P version minimize the wiring costs
- Type 2 (IEC 61496), PL c (EN ISO 13849)
- Robust, industrial housing
- 7-segment display
- Scanning range up to 6 m
- External device monitoring (EDM), restart interlock (RES), and internal self-testing configurable without PC
- Economical active/passive variants minimize the wiring costs
- Standardized M12 connectivity
- Type 2 (IEC 61496), PL c (EN ISO 13849)
- Robust, industrial housing
- 7-segment display
- Scanning range up to 25 m
- External device monitoring (EDM) and internal self-testing (configurable without PC)
- Beam coding for correct system allocation
- Standardized M12 connectivity
- Cascade up to three systems
- Type 2 (IEC 61496), PL c (EN ISO 13849)
- Robust, industrial housing
- 7-segment display
- Wide scanning range, up to 70 m
- External device monitoring (EDM), restart interlock (RES), and internal self-testing (configurable without PC)
- Beam coding for correct system allocation
- Standardized M12 connectivity
- Type 2 (IEC 61496), SIL1 (IEC 61508), PL c (EN ISO 13849)
- Robust, industrial housing
- Wide scanning range, up to 70 m
- External device monitoring (EDM) and internal self-testing configurable without PC
- Standardized M12 connectivity available
- 7-segment display
- Beam coding for correct system allocation
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Robust housing with three mounting grooves
- Wide scanning range, up to 70 m
- Resolution 60 mm or 80 mm
- External device monitoring (EDM), restart interlock, application diagnostic output, SDL interface
- 7-segment display
- Configuration and diagnostics via PC
- Beam coding for correct system allocation
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Sender/receiver in a single housing, scanning range up to 7.5 m
- External device monitoring (EDM), restart interlock, application diagnostic output, SDL interface
- Muting in combination with the UE403 muting switching amplifier
- 7-segment display
- Configuration and diagnostics via PC
- Optional integrated: LED
- Type 4 (IEC 61496), SIL3 (IEC 61508), PL e (EN ISO 13849)
- Sender/receiver in a single housing, scanning range up to 7.5 m
- External device monitoring (EDM), restart interlock and application diagnostic output
- Standardized M12 connectivity
- 7-segment display
- Configuration keys for setting directly on the device
- Beam coding for correct system allocation
- Optional integrated: LED, AS-i interface