Select your solution

You will find the right products or product families here

Filter by:

9 results:

Result 1 - 8 out of 9

  • Measuring lengths: 1.25 m ... 10 m
  • Modular measuring system with a wide selection of interfaces/measuring lengths
  • Very small, slim housing (55 mm ... 190 mm) with spring integrated in the measurement drum
  • Light yet shock-proof and temperature-resistant plastic housing
  • Analog interface with teach-in function on encoder
Compare now
  • Absolute measurement system for linear direct drives
  • Measuring lengths: up to 16,384 mm
  • High traversing speeds: up to 10 m/s
  • Status LED
  • Non-contact measurement system; reading distance to the magnetic tape: up to 0.8 mm
  • Electronic type label
  • ETL70 with one cable technology thanks to the HIPERFACE DSL® interface
  • STL70 with HIPERFACE® interface
Compare now
  • Measuring lengths from 2 m ... 5 m
  • Integrated measuring system
  • Compact housing (90 mm x 90 mm x 90 mm)
  • Incremental and absolute versions
  • High resolution
Compare now
  • Magnetostrictive principle of operation
  • Absolute position feedback
  • Resolution: up to 10 μm
  • Measuring lengths: 50 mm to 2,500 mm
  • Available interfaces: Analog and CANopen
  • Highly-flexible system architecture
  • Intelligent diagnostic functions and condition monitoring
  • Profile and hydraulic variants for many installation situations

Compare now
  • Measuring range: 50 to 2,500 mm (for MAX48N and MAX48A) or 1,500 (for MAX30N), 1 mm increments, typical resolution 0.1 mm
  • Analog, CANopen, SAE J1939 and PWM interfaces are available
  • Pressure-resistant housing, designed for hydraulic operating pressures of up to 400 bar
  • High operating temperature (electronics) up to +105 °C
  • Fluid temperature (hydraulic oil) up to max. +95 °C
  • Compact dimensions: 10 mm installation space, 30 mm cushion zone
  • Position magnet does not need a spacer disk
Compare now
  • Absolute, non-contact, wear-free length measurement system for linear motors
  • Measured lengths of up to 1 m
  • Suitable for high traverse speeds of up to 10 m/s
  • Reliable location positioning even in the event of condensation and contamination of the magnetic tape
  • Electronic type label and programming of the position value
  • Absolute location positioning, no reference run
  • HIPERFACE® interface
  • Certified according to SIL2 and PL d
Compare now
  • Non-contact length measurement – maintenance-free, rugged, long service life
  • High reproducibility (0.3 mm / 1 mm), high system resolution (0.1 mm)
  • SSI and PROFIBUS interfaces
  • Determination of absolute position
  • Measuring lengths of up to 1,700 m possible
  • Can be used in harshest ambient conditions
  • High traversing speeds of up to 6.6 m/s
  • Distance tolerance between read head and measuring element: up to 55 mm ± 20 mm possible
Compare now
  • Non-contact absolute position and speed recording
  • With HIPERFACE® or SSI interface
  • Measurement lengths of up to 4 m
  • For high traversing speeds of up to 10 m/s
  • Reliable measurements, even in the event of contamination and condensation on the magnetic tape
  • Small, compact read head
  • Certified according to SIL2 and PL d (HIPERFACE® interface)
Compare now

Result 1 - 8 out of 9