Quick mounting

Fast mounting, precise switching: Magnetic cylinder sensors from SICK

Simply insert and fix in place in no time
An innovative housing concept ensures that SICK magnetic cylinder sensors can be easily inserted into any common C-slot or T-slot – depending on the variant – from above and fixed with a captive combination screw. Sensor mounting is incredibly easy and user-friendly. The sensor retaining ribs on the side offer a key advantage during this process. They hold the sensor in place in the slot even before stainless-steel screw is tightened, preventing the sensor from sliding back out the slot – even if mounting it over head.
A quarter-turn of the combination screw then completes the time-saving drop-in mounting and locks the sensor securely in place. The stainless-steel screw also prevents the sensor from slipping or shifting in the slot, even in the event of heavy vibrations.
Mounting the sensor in any position is much easier than with many other sensors.

A solution for almost every cylinder profile
An extensive range of mounting adapter accessories are available for cylinders without a slot. This means that with just a few product variants, the magnetic cylinder sensors from SICK are able to cover practically every common type of cylinder, such as round, tie-rod, and profile cylinders.

LED for easy installation and mounting position monitoring
An LED acts as a visual installation aid and marks the optimum switching point. If the sensor is placed in that position, the LED lights up continuously during switching operations. If the yellow LED flashes, the magnetic field strength has changed. The cylinder piston is in the upper or lower outer areas of the detection zone. The sensor switches faultlessly and provides an output signal within the entire detection zone, even in the outer areas. If the LED does not light up, the cylinder piston is located outside of the sensor's detection zone. In this case, the magnet field is too weak for a reliable output signal and the sensor does not switch.
Reliable position detection

Reliable position detection – even in demanding environments

Virtually problem-free at high temperatures
Special high-temperature variants enable use at temperatures up to 100 °C. This means that magnetic cylinder sensors are able to provide reliable switching signals even in tough environments, such as the metal-working industry.

Outstanding explosion protection according to ATEX
SICK provides magnetic cylinder sensors that even meet the highest standard for use in explosion-hazardous areas. In the NAMUR version, the MZT8, for example, fulfills the requirements of the highest ATEX Category 1D, 1G (dust and gas) for use in areas with constant, long-term, or frequent explosive atmospheres. SICK has also versions in ATEX category 3D, 3G for use in areas with a lower risk of explosion. The variants for these explosion-protection categories cover applications in silo hatches, elevators, mills, or conveyors.

Rugged design ensures long service life
There are also variants with an enclosure rating of up to IP 69K for applications where cylinder sensors come into frequent contact with water or are subject to high-pressure cleaning. The rugged housing and electronics are resistant to cleaning agents, cooling lubricants, and other production chemicals.