Contact
Feedback

Incremental encoders
DBS50 Core

The MultiFit Incremental Encoder

Your Benefits

  • The universal cable connection enables the device to be used in tight spaces and provides cable routing flexibility
  • The different flanges allow the device to be mounted with servo clamps, or mounted at the front or rear side. This enables the device to be replaced without modifying the application
  • The high flexibility of the mechanical interface of the encoder and the available accessories allow for the use of a single design in many applications
  • The compact housing diameter saves valuable space
  • Long-term and reliable operation thanks to a high enclosure rating, temperature resistance and bearing lifetime

Overview

The MultiFit Incremental Encoder

The DBS50 Core incremental encoder features impressively high mechanical flexibility, excellent technical properties, and a number of variations. The DBS50 Core has a 50 mm diameter face mount flange and an 8 mm diameter solid shaft. The housing, which measures 37 mm in diameter and less than 36 mm in length, is extremely compact and saves valuable installation space. The DBS50 Core offers a comprehensive range of mounting options thanks to its numerous mounting hole patterns, servo clamps, servo grooves, and triangular servo clamps. The encoder has compact dimensions and a universal cable connection that allows for cables to run in an axial or radial direction.

At a glance
  • Universal cable connection
  • Face mount flange with 8 mm solid shaft
  • Face mount flange with 2 mounting hole patterns, servo clamps with servo grooves or triangular servo clamps
  • Communication interfaces: TTL/RS-422, HTL/push pull, Open Collector
  • Number of lines from 10 to 2,500 possible
  • Temperature range: –20 °C ... +85 °C
  • Enclosure rating: IP65

Applications

Technical overview

 
  • Technical data overview

    Technical data overview

    Pulses per revolution0 … 2,500
    Mechanical design

    Solid shaft, face mount flange

    Solid shaft, face mount flange 3xM4

    Shaft diameter8 mm
    Connection type

    Cable, 8-wire, universal

    Cable, 5-wire, universal

    Cable, 8-wire, with male connector, M12, 8-pin, universal

    Cable, 8-wire, with male connector, M23, 12-pin, universal

    Communication interfaceIncremental
    Communication Interface detail

    TTL / RS-422

    HTL / Push pull

    Open Collector

    Supply voltage

    4.5 ... 5.5 V

    7 ... 30 V

    7 ... 27 V

    4.5 ... 30 V

    Enclosure ratingIP65
    Programmable/configurable
    Output frequency≤ 300 kHz
    Operating temperature range

    –20 °C ... +85 °C

    –20 °C ... +70 °C

All technical data can be found accompanying the individual product

Downloads

TOP