The MAX® linear encoder is designed for position measurements in mobile hydraulic applications in hydraulic cylinders and controls hydraulic components of self-driving mobile machines. The magnetostriction technology provides highly reliable, wear- and maintenance-free absolute position detection. The pressure-resistant housing protects the encoder in the hydraulic cylinder from influences during operation, such as fluid temperatures, vibrations, hydraulic oil, electrical and magnetic fields.
Different sizes offer numerous installation options:
MAX30N with a 30 mm housing for very small hydraulic cylinders.
MAX48N with radial cable entry for space-saving electrical connection.
MAX48A with axial cable entry and rugged stainless-steel housing.
The diagnostic functions of the MAX® can be used to examine the operating cycles of hydraulic cylinders.
At a glance
Measuring range: 50 to 2,500 mm (for MAX48N and MAX48A) or 1,500 (for MAX30N), 1 mm increments, typical resolution 0.1 mm
Analog, CANopen, SAE J1939 and PWM interfaces are available
Pressure-resistant housing, designed for hydraulic operating pressures of up to 400 bar
High operating temperature (electronics) up to +105 °C
Fluid temperature (hydraulic oil) up to max. +95 °C
Compact dimensions: 10 mm installation space, 30 mm cushion zone
Position magnet does not need a spacer disk
Compatible with all common cylinder designs
With linear encoders from the MAX® product family, you can quickly and easily switch from previously used devices to reliable and flexible encoders: MAX® encoders are designed with dimensions that make them very easy to integrate into hydraulic cylinders on mobile machines. The advantage: When the linear encoder is switched, existing cylinder designs can still be used. This makes additional milling or drilling processes and complete redesign of the cylinder unnecessary. Changing the encoder therefore saves time, minimizes effort and reduces costs. In addition, the MAX® is available with all common interfaces, e.g. analog interfaces (V DC, mA) and PWM, as well as with the CANopen and SAE J1939 protocols.
Quick replacement for permanent benefit
Many cylinders, one solution: MAX® linear encoders can be integrated into new as well as existing cylinder designs in a time- and cost-saving manner.
Opens up new possibilities with space-saving design
The MAX48N and MAX48A linear encoders score on several levels with their compact design. Due to the radial electrical connection of the MAX48N, the required installation space for the electrical connection in the cylinder is significantly reduced. Compared to the devices common on the market, the MAX® linear encoder offers a shorter damping zone as well as selection of the measuring range in 1 mm steps. This shortens the installation space in the cylinder because the bore depth in the piston rod is reduced. This means shorter processing times with less material loss. The reduction in the installation dimensions saves valuable space in the cylinder. And this saves time and money.
The highlight: With the very compact MAX30N linear encoder, position measurements can be carried out in very small cylinders. This makes it possible to automate applications whose automation was previously technically unfeasible.
Reduced installation space, extended range of applications
Compact, flexible and innovative: MAX30N, MAX48N and MAX48A devices expand the range of uses and applications for linear encoders thanks to the small dimensions and novel functions.
Rugged and reliable, even under very demanding conditions
The requirements in mobile machines are strict: Sensors must provide consistently reliable measured values in large temperature and pressure ranges as well as under high mechanical loads. The MAX® relies on proven magnetostrictive technology that allows accurate position measurements at temperatures up to 95 °C. A high power reserve enables measurement of the cylinder position even at critical temperatures and also has a positive effect on the service life of the encoder. In addition to high resistance to impact loads and vibration, MAX30N, MAX48N and MAX48A devices meet common market EMC requirements for a wide range of machine types.
More power reserves, more reliability.
When the going gets rough: As linear encoders for mobile machines, MAX30N, MAX48N and MAX48A devices are designed for reliable position measurements under extreme ambient conditions and full load.
With numerous diagnostic functions for higher efficiency and reliability
With MAX30N, MAX48N and MAX48A devices, machine manufacturers, cylinder manufacturers and operators of mobile machines now finally have access to system-relevant status data of cylinders, such as temperature, supply voltage, piston travel or number of operating cycles and operating hours. As a result, these linear encoders enable the integration of hydraulic cylinders into maintenance systems and intelligent controls. By evaluating stroke lengths or temperature curves, for example, statements can be made about the stress on the cylinder and the operating states of the encoder. In this way, it is possible to get to the bottom of possible causes of failure and use data to advance the development of hydraulic cylinders and hydraulic drive systems. During operation, MAX30N, MAX48N or MAX48A devices keep all important parameters in view. This effectively prevents critical operating states, increases machine availability and extends the service life of the hydraulic drive systems.
Increase transparency, improve reliability
The MAX30N, MAX48N and MAX48A diagnostic functions are used to generate encoder operating histograms. This allows, for example, the load limits of hydraulic cylinders to be identified and avoided in the future. The diagnostic data thus provides the basis for long-term reliability of hydraulic cylinders and entire hydraulic systems.