Modules and gateways

Show all Hide all
Filter by:

70 results:

Result 1 - 24 out of 70

  • Accessory family: Fieldbus modules
  • Description: Features: Profibus DP-V1 slave, transmission rate of 9.6 kbit/s – 12 Mbit/s, D-Sub connection (RS485), 9-pin, Profibus, M8 connection, 4-pin, access to all parameters of the connected sensors possible. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherCAT coupler for WLL180T, KTL180 and AOD1. Features: EtherCAT, transmission rates of up to 100 Mbaud, M12 EtherCAT connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: External, passive control unit with one pushbutton and three LEDs, cable with male connector M12, 4-pin, PLC: pin 2 and pin 4 swapped, cable material: PUR, housing material: plastic, TPU, reinforced, supply voltage: DC 18 V DC ... 30 V DC, current Imax.: 510 mA, protection class: III (EN 61140), EMC: EN 61000-6-2, EN 61000-6-4, ambient temperature operation: –25 °C ... +55 °C, ambient temperature storage: –25 °C ... +70 °C
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: External, passive control unit with one pushbutton and three LEDs. Cable with male connector M12, 4-pin, cable material: PUR, housing material: plastic, TPU, reinforced, supply voltage: DC 18 V DC ... 30 V DC, current Imax.: 510 mA, protection class: III (EN 61140), EMC: EN 61000-6-2, EN 61000-6-4, ambient temperature operation: –25 °C ... +55 °C, ambient temperature storage: –25 °C ... +70 °C
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: PROFINET coupler for WLL180T, KTL180 and AOD1. Features: PROFINET IRT, transmission rates 10 Mbaud – 100 Mbaud, M12 PROFINET connection, M8 voltage supply connection, 4-pin, full read/write functionality for the process and service data of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Interface modules
  • Description: Enables access to the device data of IO-Link sensors originating from third-party tools, compatible with FieldEcho®
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: PROFINET coupler for WLL180T and AOD1. Properties: PROFINET IRT, transmission rates of 10 MBaud - 100 MBaud, M12 connection, M8 voltage supply connection, 4-pin, only output of switching output Q1 of the connected sensors. See operating instructions for additional information and technical details
Details
Compare now
Piece
  • Accessory family: Cloning module
  • Description: External parameter memory for integration in CDB620/CDB650/CDM42x
Details
Compare now
Piece
  • Accessory family: Power supply modules
  • Description: Power supply unit, 10.8 W
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Compact connection module for wiring the voltage supply, I/Os, serial data interface and encoder. Intended for use with Bulkscan® LMS511. The mounting bracket with part no. 2059271 is required to connect the sensor.
Details
Compare now
Piece
  • Accessory family: Fieldbus modules
  • Description: EtherNet/IP IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12-cable
This product is in phase out! Details
Compare now
  • Accessory family: Fieldbus modules
  • Description: EtherCAT IO-Link Master, IO-Link V1.1, Port Class A, power supply via 7/8'' cable 24 V / 8 A, fieldbus connection via M12 cable
This product is in phase out! Details
Compare now
  • Accessory family: Connection modules
  • Description: Ranger E/D connection terminal, screw connectors for fast I/O and encoder connection, DSUB for camera connection and plug for 24 V power supply
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Encoder splitter for connection of up to eight devices to one encoder
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Mini evaluation unit, OD5000 and OL1, slave, 3 x Q, 1 x analog, open end cable, 2 m
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: OD Mini evaluation unit, OD5000 and OL1, master, 3 x Q, 1 x analog, open end cable, 2 m
Details
Compare now
Piece
  • Accessory family: Cloning module
  • Description: IO-Link version V1.1, Port class 2, PIN 2, 4, 5 galvanically connected, Supply voltage 18 V DC ... 32 V DC (limit values, operation in short-circuit protected network max. 8 A)
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Single port PCI board for connection to Gigabit Ethernet high-end camera
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: Indoor Ethernet-Switch, 8 ports, operating temperature range 0 °C ... +55 °C
Details
Compare now
Piece
  • Accessory family: Power supply modules
  • Description: NAMUR isolating amplifier, Cable fault detection, Switching outputs: 2 NO relay (1 per channel), Supply voltage: 19,2 V ... 30 V, Voltage type: DC
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: Evaluation unit: OD Precision, 5 x NPN
Details
Compare now
Piece
  • Accessory family: Evaluation units
  • Description: Evaluation unit: OD Precision, 5 x PNP
Details
Compare now
Piece
  • Accessory family: EFI gateways
  • Description: PROFINET PROFIsafe
Details
Compare now
Piece
  • Accessory family: Connection modules
  • Description: I/O extension module to extend the number of digital inputs in combination with I/O extension box. Number of digital inputs: 2, only to use with 6037654
Details
Compare now
Piece

Result 1 - 24 out of 70